72%22 On Upper Sections Connection Between Lower And Upper Sections Mortise And Tenon Joint At 40%22 Height Lower Section Create A Tenon 1%22 Long At The Top Upper Section Create A Corresponding Mortise 1%22 Deep At The Bottom Cross Leg Sections 4 Pieces 5 5 8%22 X 3 5 16%22 X 1 5 16%22 Joinery 1 2%22 Tenon On Each End To Connect Uprights Horizontal Frame Pieces 18 Pieces 9 Pieces 52%22 X 3 5 16%22 X 1 5 16%22 Front And Back Joinery 1%22 Tenon On Each End To Fit Into Upright Mortises 9 Pieces 10 Generator

A detailed illustration of a wooden shelf with specified dimensions and joinery details.

The design features eight uprights with varying heights,

mortise and tenon joints,

horizontal frame pieces,

and adjustable shelves.

The details include dimensions for each component and joinery methods for assembly.

An automatic hand-caught cake up and down laminating machine with a base.

Includes a mounting plate connected to the base.

Features unwinding and rewinding rollers.

A first motor is attached to one end,

with a guide rod and guide roller.

The installation plate has a conveyor mechanism and a hot pressing mechanism.

Technical drawing of a rectangular section with notches.

Height measures 30 units.

Width measures 50 units.

Features 10x10 notches on either side.

Top view shows width of 50 units.

Side view emphasizes height of 30 units and depth of 50 units.

Suitable for engineering and architectural projects.

Draw three horizontal rectangles for Top View,

Front View,

and Right Side View.

Arrange them.

Front View is centered in the middle.

Top View is directly above the Front View.

RHS View is to the right of the Front View.

Technical drawing of a dual-sided e-paper departure board.

E-paper panel is 13 inches integrated into a housing.

Housing dimensions are 42 cm x 40 cm x 10 cm.

Landscape format with two M10 drilling holes on the left side.

Drawing shows front perspective with size annotations.

A plastic board with specific dimensions and features.

The board thickness is 5mm,

width is 8cm,

and length is 40cm.

Rails are present on the length sides,

with a thickness of 3mm and a height of 2.

5cm.

A hole is located in the middle of the board.

The hole is circular,

5mm in diameter,

centered at 20cm from the width.

A section is cut off for the hole to create a straight line facing the width side,

with an arc.

The longest distance from the middle of the straight part to the arc measures 4.

5mm.

Technical drawing illustrates a pentagonal pyramid.

Base measures 50 mm.

Axis length is 70 mm.

Base is on the horizontal plane with one edge perpendicular to the vertical plane.

A section plane is shown,

inclined at 40 degrees to the horizontal,

bisecting the axis.

The image includes front view,

sectional top view,

sectional side view,

and true shape of the section.

The image presents a technical drawing featuring a fillet with a radius of 3/4 inches.

It includes precise measurements for various dimensions,

including a height of 3.

5 inches and width of 7 inches.

The fillet is illustrated with a 37-degree angle,

contributing to the drawing's overall design.

The drawing is detailed,

ensuring accuracy for engineering purposes.

This schematic would be valuable in manufacturing or architectural contexts.

This image shows a detailed orthographic scale drawing of a five-piece furniture set.

Each piece features specific dimensions,

including height,

width,

and thickness.

Table height is 74 cm,

width is 120 cm,

thickness 6 cm,

with rounded corners of 4-5 cm.

Second piece: 67 cm height,

106 cm width,

thickness 5 cm,

3-4 cm corners.

Third piece: 61 cm height,

94 cm width,

5 cm thickness,

2.

5-3.

5 cm corners.

Fourth piece: 55 cm height,

82 cm width,

4.

5 cm thickness,

2-3 cm corners.

Smallest piece: 49.

5 cm height,

71 cm width,

4 cm thickness,

1.

5-2.

5 cm corners.

The drawing is clear and precise,

showing all dimensions.

Detailed orthographic scale drawing of a five-piece furniture set.

Each piece has specific dimensions.

Table height is 74 cm,

width is 120 cm,

thickness 6 cm,

rounded corners of 4-5 cm.

Second piece: 67 cm height,

106 cm width,

thickness 5 cm,

3-4 cm corners.

Third piece: 61 cm height,

94 cm width,

5 cm thickness,

2.

5-3.

5 cm corners.

Fourth piece: 55 cm height,

82 cm width,

4.

5 cm thickness,

2-3 cm corners.

Smallest piece: 49.

5 cm height,

71 cm width,

4 cm thickness,

1.

5-2.

5 cm corners.

Clear and precise drawing showing dimensions.

This image depicts an orthographic scale drawing of a five-piece furniture set,

designed with specified dimensions for each piece.

The outer table stands at a height of 74 cm and a width of 120 cm,

with a thickness of 6 cm,

featuring rounded corners with a radius of 4-5 cm.

The second piece measures 67 cm in height and 106 cm in width,

with a thickness of 5 cm,

and corners rounded at 3-4 cm.

The third piece is 61 cm tall,

94 cm wide,

and 5 cm thick,

featuring a corner radius of 2.

5-3.

5 cm.

The fourth piece has a height of 55 cm,

width of 82 cm,

and thickness of 4.

5 cm,

with rounded corners of 2-3 cm.

Lastly,

the smallest piece stands at 49.

5 cm high,

71 cm wide,

and 4 cm thick,

with a corner radius of 1.

5-2.

5 cm.

The drawing focuses on clarity and precision,

ensuring all dimensions are readily visible for reference.

This technical drawing features a rectangular section detailed with notches.

The front view illustrates a height of 30 units and a width of 50 units,

clearly depicting 10x10 notches on either side.

The top view shows the same width of 50 units and a depth that accounts for the notches.

Additionally,

the side view captures a height of 30 units and a depth of 50 units,

emphasizing the notches as protruding features.

This illustration serves as a precise representation for engineering and architectural projects,

beneficial for ensuring accuracy in specifications.

3D model converted into a sectional drawing.

Varied line weights used to show depth.

Thicker lines denote closer objects.

With precise line work,

details highlighted on tables and cylindrical sections.

Walls and structural elements defined with hatch patterns.

Clear separation between different planes enhances depth and spatial arrangement.

Drawing shows rectangular section with notches,

front view height of 30 units and width of 50 units,

notches on each side.

Top view width of 50 units,

depth with notches.

Side view height of 30 units and depth of 50 units,

notches as protrusions.

Suitable for engineering and architectural contexts.

Convert this 3D model into a sectional drawing.

Use varied line weights to show depth,

with thicker lines for objects closer to the viewer and thinner lines for those further away.

Highlight the details of the tables and cylindrical sections with precise line work.

Ensure the walls and structural elements are clearly defined with appropriate hatch patterns.

Maintain clear separation between different planes to enhance the sense of depth and spatial arrangement.

A hand is drawing intricate fern leaves on a piece of paper with a pen.

Design a wooden ladder with total height 230 cm.

Include 2 pieces of side rails,

8 steps,

step spacing,

and angle of side rails.

Technical illustration drawing of a holder designed for four 250 ml coffee cups.

Dimensions provided for length of 28.

0 and width of 12.

0 while height is 20.

05.

Frame supports two cups on each side,

with detailed measurements shown.

Image features a wooden box with three drawers and removable cutting board.

Dimensions are 30 cm long 20 cm wide 10 cm high.

Four rubber legs are included for stability.

This technical drawing represents a rectangular section with notches.

The front view shows a height of 30 units and a width of 50 units,

highlighting 10x10 notches on each side.

The top view maintains the same width of 50 units and a depth that includes the notches.

The side view reflects a height of 30 units and a depth of 50 units,

showcasing the notches as protrusions.

This illustration can be utilized in engineering and architectural contexts for precise representation of specifications.

A chair shown in different views.

The design is simplified into a single outline.

Representation suitable for AutoCAD in dwg format.

The image displays a technical drawing of a pentagonal pyramid with a base of 50 mm sides and an axis length of 70 mm.

The base lies on the horizontal plane,

with one of the base edges oriented perpendicular to the vertical plane.

A section plane is shown,

which is perpendicular to the vertical plane and inclined at 40 degrees to the horizontal plane,

bisecting the axis of the pyramid.

The various views represent the front view,

sectional top view,

sectional side view,

and the true shape of the section.

This drawing illustrates the complex geometry involved in three-dimensional shapes in a two-dimensional format.

The image depicts a technical drawing of a bevel gear.

The gear is represented in outline form.

The gear design features a 30-degree angle for precise engineering applications.

The image displays a technical drawing of a pentagonal pyramid.

It has a base with sides measuring 50 mm and an axis length of 70 mm.

The base is positioned on the horizontal plane.

One edge of the base is oriented perpendicularly to the vertical plane.

A section plane is illustrated,

which is perpendicular to the vertical plane and inclined at 40 degrees to the horizontal.

This section plane bisects the pyramid's axis.

The various views include the front view,

sectional top view,

sectional side view,

and the true shape of the section,

demonstrating complex geometry in a two-dimensional layout.