Close-up image of a QFN24 chip on a circuit board.
Soft lighting highlights the chip's details.
The inductor is made of copper wire and sits on a green printed circuit board with various electronic components.
A motor with a small green box on its rear seat with 'Avishan' written.
The engine appears operational.
Show interconnected computers and inverter control properties.
Include reference voltage and frequency.
Use a colorful dark screen background.
Macro photograph of a green microcontroller board.
Board features various electronic components and connectors.
Dark backdrop adds contrast to the board's details.
The board is beige with a grid pattern and colorful buttons on the chip.
Close-up of a green printed circuit board.
Features various electronic components including resistors capacitors and a microcontroller.
Bias lighting highlights the intricate details of the design.
Overhead perspective provides a clear view.
An optocoupler IC with PC817 printed on it.
This IC is designed to resist high voltage.
It features four pins,
two on each side.
microcontrollers,
and resistors on a green board.
Capture an electronic conductor on a circuit board.
The conductor emits light,
highlighting its function.
Show intricate details of the components.
Speaker box with two subwoofers positioned on the front and two upwards.
Each subwoofer has a volume of 60 liters and includes a vent.
High-intensity parliamentary debate in South Korea National Assembly hall.
Prime Minister Lee Jae-myung points at economic charts.
Opposition lawmakers present.
Digital screens show real-time voting data.
Rapid press camera flashes occur.
Dramatic motion blur captured.
Shot with Sony α9 III at 120fps.
70-200mm f/2.
8 GM lens.
Mixed tungsten and fluorescent lighting.
Sharp shadows on desks.
Agitated water glasses with droplets on desks.
A macro photograph of a green microcontroller board showcasing various electronic components and connectors against a dark backdrop.
A plastic board with specific dimensions and features.
The board thickness is 5mm,
width is 8cm,
and length is 40cm.
Rails are present on the length sides,
with a thickness of 3mm and a height of 2.
5cm.
A hole is located in the middle of the board.
The hole is circular,
5mm in diameter,
centered at 20cm from the width.
with an arc.
The longest distance from the middle of the straight part to the arc measures 4.
5mm.
An optocoupler integrated circuit with PC817 marking on it.
The circuit board design features high voltage resistance.
Bright red lighting accentuates the micro details of the components.
Intricate details of the circuit board with various components included.
Close-up of a tactile switch on a printed circuit board with details visible.
Focus on attempting to debouncing it.
Close-up image of an electronic circuit board featuring a glowing red diode.
The circuit board shows intricate pathways and additional components with a focus on the illuminated part.
Close-up photograph of a pressure regulator with two gauges displaying pressure readings.
Photo of a circuit board with microchips and various electronic components in a close-up view
and final connection back to point 1.
Schematic diagram showing connections of microcontroller ESP32,
motion sensor gyroscope,
GPS module,
buzzer,