Image Prompt for Flux AI

7 Mm Fibreboard And 15 Generator

A plastic board with specific dimensions and features. The board thickness is 5mm, width is 8cm, and length is 40cm. Rails are present on the length sides, with a thickness of 3mm and a height of 2.5cm. A hole is located in the middle of the board. The hole is circular, 5mm in diameter, centered at 20cm from the width. A section is cut off for the hole to create a straight line facing the width side, with an arc. The longest distance from the middle of the straight part to the arc measures 4.5mm.

Technical Overview of a Plastic Board with Specific Dimensions and Features

This image shows a detailed orthographic scale drawing of a five-piece furniture set. Each piece features specific dimensions, including height, width, and thickness. Table height is 74 cm, width is 120 cm, thickness 6 cm, with rounded corners of 4-5 cm. Second piece: 67 cm height, 106 cm width, thickness 5 cm, 3-4 cm corners. Third piece: 61 cm height, 94 cm width, 5 cm thickness, 2.5-3.5 cm corners. Fourth piece: 55 cm height, 82 cm width, 4.5 cm thickness, 2-3 cm corners. Smallest piece: 49.5 cm height, 71 cm width, 4 cm thickness, 1.5-2.5 cm corners. The drawing is clear and precise, showing all dimensions.

Orthographic Technical Drawing of Five-Piece Furniture Set with Detailed Dimensions

Detailed orthographic scale drawing of a five-piece furniture set. Each piece has specific dimensions. Table height is 74 cm, width is 120 cm, thickness 6 cm, rounded corners of 4-5 cm. Second piece: 67 cm height, 106 cm width, thickness 5 cm, 3-4 cm corners. Third piece: 61 cm height, 94 cm width, 5 cm thickness, 2.5-3.5 cm corners. Fourth piece: 55 cm height, 82 cm width, 4.5 cm thickness, 2-3 cm corners. Smallest piece: 49.5 cm height, 71 cm width, 4 cm thickness, 1.5-2.5 cm corners.

Orthographic Drawing of a Five-Piece Furniture Set with Detailed Dimensions

Image shows wooden box with three drawers and removable cutting board. Box dimensions are 30 cm long, 20 cm wide, and 10 cm high. Features four rubber legs for stability.

Wooden Box with Three Drawers and Removable Cutting Board for Kitchen Organization

Technical drawing showcases dual-sided e-paper departure board. E-paper panel has integrated housing. Dimensions are 42 cm x 40 cm x 10 cm. Layout is landscape. Two M10 drilling holes are on the left side. Size annotations are included.

Technical Drawing of Dual-Sided E-Paper Departure Board Dimensions and Features

A detailed illustration of a wooden shelf with specified dimensions and joinery details. The design features eight uprights with varying heights, mortise and tenon joints, horizontal frame pieces, and adjustable shelves. The details include dimensions for each component and joinery methods for assembly.

Detailed Wooden Shelf Design with Dimensions and Joinery Techniques

Design a wooden ladder with total height 230 cm. Include 2 pieces of side rails, 8 steps, step spacing, and angle of side rails.

DIY Wooden Ladder Design with Dimensions and Assembly Instructions

Plywood peace symbol with the word Peace underneath. Dimension range from 6cm to 14cm.

Plywood Peace Symbol Wall Art for Home Decor

Image features a wooden box with three drawers and removable cutting board. Dimensions are 30 cm long 20 cm wide 10 cm high. Four rubber legs are included for stability.

Compact Wooden Drawer Box with Removable Cutting Board and Rubber Legs

Detailed orthographic scale drawing of a five-piece furniture set. Each piece has specific dimensions. Table height is 74 cm, width is 120 cm, thickness 6 cm, rounded corners of 4-5 cm. Second piece: 67 cm height, 106 cm width, thickness 5 cm, 3-4 cm corners. Third piece: 61 cm height, 94 cm width, 5 cm thickness, 2.5-3.5 cm corners. Fourth piece: 55 cm height, 82 cm width, 4.5 cm thickness, 2-3 cm corners. Smallest piece: 49.5 cm height, 71 cm width, 4 cm thickness, 1.5-2.5 cm corners. Clear and precise drawing showing dimensions.

Orthographic Scale Drawing of a Five-Piece Modern Furniture Set with Dimensions

This image depicts an orthographic scale drawing of a five-piece furniture set, designed with specified dimensions for each piece. The outer table stands at a height of 74 cm and a width of 120 cm, with a thickness of 6 cm, featuring rounded corners with a radius of 4-5 cm. The second piece measures 67 cm in height and 106 cm in width, with a thickness of 5 cm, and corners rounded at 3-4 cm. The third piece is 61 cm tall, 94 cm wide, and 5 cm thick, featuring a corner radius of 2.5-3.5 cm. The fourth piece has a height of 55 cm, width of 82 cm, and thickness of 4.5 cm, with rounded corners of 2-3 cm. Lastly, the smallest piece stands at 49.5 cm high, 71 cm wide, and 4 cm thick, with a corner radius of 1.5-2.5 cm. The drawing focuses on clarity and precision, ensuring all dimensions are readily visible for reference.

Orthographic Scale Drawing of Five-Piece Furniture Set with Detailed Dimensions

Beige rectangular board displayed with measurement markings. Dimensions indicated clearly. Includes a small tool on the right for reference.

Beige Panel with Measurement Markings for Interior Design and Construction Planning

A modern bookcase in a bright room. The bookcase is made of plywood with a teak stain. It features five modules for displaying books. The middle module holds a 32-inch TV. The lower section has closed cabinets with smooth plywood fronts. The design reflects Danish style furniture from the 1960s. The bookcase has a built-in wall effect.

Modern Teak Plywood Bookcase with Integrated TV for Stylish Living Room

Design a wooden ladder with a total height of 230 cm. Include two pieces of side rails and eight steps. Consider step spacing and the angle of the side rails.

Custom Wooden Ladder Design with 230 cm Height and 8 Steps

Image of a power supply PCB showing various electronic components like capacitors, microcontrollers, and resistors on a green board.

Detailed Overview of a Power Supply PCB Design with Electronic Components

The image displays a technical drawing of a pentagonal pyramid with a base of 50 mm sides and an axis length of 70 mm. The base lies on the horizontal plane, with one of the base edges oriented perpendicular to the vertical plane. A section plane is shown, which is perpendicular to the vertical plane and inclined at 40 degrees to the horizontal plane, bisecting the axis of the pyramid. The various views represent the front view, sectional top view, sectional side view, and the true shape of the section. This drawing illustrates the complex geometry involved in three-dimensional shapes in a two-dimensional format.

Pentagonal Pyramid Technical Drawing with Section Plane at 40° to H.P.

3D design of a rectangular box with interior partitions. Dimensions are 17.5 cm by 20 cm by 6 cm. Open from the top. Divided into three sections measuring 5 cm, 5 cm, and 10 cm. Vertical sheets create compartments with a clean and sturdy appearance, resembling cardboard or wood.

3D Render of a Functional Rectangular Box Design with Interior Partitions

Carton corrugated sleeve box without lid shown. Box dimensions are 1200 mm x 600 mm x 150 mm. Thickness of cardboard is 2 mm.

Durable Corrugated Cardboard Sleeve Box – Dimensions 1200mm x 600mm x 150mm

Technical drawing of a dual-sided e-paper departure board. E-paper panel is 13 inches integrated into a housing. Housing dimensions are 42 cm x 40 cm x 10 cm. Landscape format with two M10 drilling holes on the left side. Drawing shows front perspective with size annotations.

Technical Drawing of Dual-Sided E-Paper Departure Board with Dimensions and Drilling Holes

Draw a corrugated sleeve box without lid. Box dimensions are 605 mm x 808 mm x 24 mm. The thickness is 2 mm.

Corrugated Cardboard Sleeve Box Without Lid - Dimensions 605mm x 808mm x 24mm

Guitar body template A combination of Strandberg 7 strings guitar design with Syu features from Galnerus and a star shaped design.

Custom Strandberg and Syu Inspired 7 String Electric Guitar Design

Illustration of a pentagonal plate with dimensions. One corner on horizontal plane. Plane inclined at thirty degrees to HP. Opposite side inclined at forty-five degrees to the vertical plane. Projection lines clearly marked.

Projection of a pentagonal plate inclined at 30° to the horizontal plane with detailed dimensions

A wooden cutting board is adorned with an assortment of cheeses and fruits. The display includes a large wedge of yellow cheese with holes, alongside slices of a mild yellow cheese. There are two rounds of creamy white cheese stacked together, one with a small bite taken out. Scattered around the cheeses are a few fresh grapes, adding a splash of color. The board is surrounded by a rustic atmosphere, emphasizing the natural elements of the cheeses and fruits.

Assorted Gourmet Cheeses and Fresh Fruits on a Rustic Wooden Cutting Board

The image features a whimsical, 3D representation of a gun inspired by the Glock model. The design is unique, with a soft, paper-like texture and vibrant colors. The gun showcases a playful mix of light beige on the top, dark blue on the body, and soft red on the grip. This artistic representation focuses on fun rather than realism, making it suitable for children or as a decorative piece. It captures the imagination while promoting safety and creativity in toy design.

Whimsical 3D Paper Gun Model Inspired by Glock Design