Image Prompt for Flux AI

And Angle Of Side Rails Generator

Design plan for a wooden ramp for Hot Wheels cars. Ramp has a height of four feet. Ramp is angled at forty-five degrees. Includes measuring details and construction angles.

DIY Design Plan for Wooden Hot Wheels Diecast Car Racing Ramp at 4 Feet Height

Design a wooden ladder with a total height of 230 cm. Include two pieces of side rails and eight steps. Consider step spacing and the angle of the side rails.

Custom Wooden Ladder Design with 230 cm Height and 8 Steps

Design plan for wooden stairs and a ramp. Stairs height is 18.2 cm width of 84 cm depth is 30 cm total height reaches 91 cm. Last stair design noted as 84 over 84.

Technical Plan for Wooden Stairs and Ramp with Dimensions

This technical drawing represents a rectangular section with notches. The front view shows a height of 30 units and a width of 50 units, highlighting 10x10 notches on each side. The top view maintains the same width of 50 units and a depth that includes the notches. The side view reflects a height of 30 units and a depth of 50 units, showcasing the notches as protrusions. This illustration can be utilized in engineering and architectural contexts for precise representation of specifications.

Orthographic Technical Drawing of a Rectangular Section with Notches

Generate a side view blueprint drawing of the weapons shown. The drawing should clearly depict the details of both guns from a lateral perspective. Use clean lines and include measurements and labels for various components. Ensure that the finish and texture are represented accurately in a schematic style. Add a neutral background to enhance the clarity of the drawing.

Detailed Side View Blueprint Drawing of Firearms with Measurements and Labels

3D model converted into a sectional drawing. Varied line weights used to show depth. Thicker lines denote closer objects. With precise line work, details highlighted on tables and cylindrical sections. Walls and structural elements defined with hatch patterns. Clear separation between different planes enhances depth and spatial arrangement. Drawing shows rectangular section with notches, front view height of 30 units and width of 50 units, notches on each side. Top view width of 50 units, depth with notches. Side view height of 30 units and depth of 50 units, notches as protrusions. Suitable for engineering and architectural contexts.

Detailed Sectional Drawing of a Rectangular Design with Notches and Line Weight Variation

The image depicts a technical drawing of a bevel gear. The gear is represented in outline form. The gear design features a 30-degree angle for precise engineering applications.

Technical Drawing of a Bevel Gear with 30-Degree Angle

Image shows automatic production line with a six-axis robotic arm. The robotic arm is orange. Background contains multiple robotic arms and production equipment. Setting is a manufacturing facility with high-tech machinery.

Advanced Six-axis Robotic Arm in Modern Automated Production Line

Design a wooden ladder with total height 230 cm. Include 2 pieces of side rails, 8 steps, step spacing, and angle of side rails.

DIY Wooden Ladder Design with Dimensions and Assembly Instructions

Schematic diagram for a wooden fence. Overall dimensions show length height and elevation. Includes detailed components such as vertical posts and panel types. Solid slatted panels follow a specific arrangement with measurements. Visual layout provides guidance on placement of materials. Clear representation of posts and panels.

DIY Wooden Fence Schematic Diagram - Detailed Guide with Dimensions and Components

A plastic board with specific dimensions and features. The board thickness is 5mm, width is 8cm, and length is 40cm. Rails are present on the length sides, with a thickness of 3mm and a height of 2.5cm. A hole is located in the middle of the board. The hole is circular, 5mm in diameter, centered at 20cm from the width. A section is cut off for the hole to create a straight line facing the width side, with an arc. The longest distance from the middle of the straight part to the arc measures 4.5mm.

Technical Overview of a Plastic Board with Specific Dimensions and Features

Sketch depicts a V-shaped clamp block. Dimensions include 8M and 827me. Technical style showcases precise lines and angles. Background grid highlights measurement.

Technical Sketch of a V-Shaped Clamp Block with Dimensions and Precision Lines

Sketch showcasing a front view of a table with rod support. The design features a rectangular tabletop supported by pipes acting as legs. The illustration focuses on the structural aspects of the rods and connections.

Sketch of Industrial Style Table with Rod Support

Top-down aerial view of racing track layout with straight sections. Tight hairpin turns and S curve chicane included. Features pit lane, green grass, gravel traps, safety barriers, grandstands, trackside flags, and advertisements with letters RU.

Top-Down Aerial View of a Racing Track with Hairpin Turns and S Curves

A woman is preparing to lift a barbell in a gym setting.

Focused Strength

Orthographic design of an aircraft flange with visible dowel pin holes. The image shows front view of the flange clearly detailing its features. The side and top views are not visible in this image as focus stays on front view.

Orthographic Design of Aircraft Flange with Dowel Pin Holes for Engineering and Aerospace Applications

Detailed sketch of a G-shaped clamp block. The sketch includes dimensions and presents a technical perspective. Emphasis on precise lines and angles in the design. A grid background indicates measurement accuracy.

Technical Sketch of a G-Shaped Clamp Block with Dimensions and Accurate Perspective

Technical drawing of a rectangular section with notches. Height measures 30 units. Width measures 50 units. Features 10x10 notches on either side. Top view shows width of 50 units. Side view emphasizes height of 30 units and depth of 50 units. Suitable for engineering and architectural projects.

Technical Drawing of a Rectangular Section with Notches for Engineering and Architectural Applications

This technical drawing features a rectangular section detailed with notches. The front view illustrates a height of 30 units and a width of 50 units, clearly depicting 10x10 notches on either side. The top view shows the same width of 50 units and a depth that accounts for the notches. Additionally, the side view captures a height of 30 units and a depth of 50 units, emphasizing the notches as protruding features. This illustration serves as a precise representation for engineering and architectural projects, beneficial for ensuring accuracy in specifications.

Technical Drawing of Rectangular Section with Notches for Engineering and Architectural Use

Sketch of a V-shaped clamp block with dimensions and perspective in technical style. Focus on precise lines and angles. Background grid suggests measurement and accuracy.

Orthographic Drawing of V Clamp Block in Technical Design Style

Technical illustration drawing of a holder designed for four 250 ml coffee cups. Dimensions provided for length of 28.0 and width of 12.0 while height is 20.05. Frame supports two cups on each side, with detailed measurements shown.

Detailed Technical Illustration of Coffee Cup Holder for Four 250 ml Cups with Dimensions

Illustration shows a horizontal cross-section. It depicts an old beam grid with a wooden plank floor. The condition of the beams is good but bent. Ceramic tiles are illustrated showing a thickness of 8mm. The drawing includes structural supports and connections clearly marked.

Architectural Sketch of Horizontal Cross-Section with Beam Grid and Ceramic Tiles

A rugby player is getting tackled around the legs during an exciting rugby match. The field is illuminated by stadium lights. Players are wearing their team jerseys. The atmosphere is intense with spectators in the background. The focus is on the action of the tackle.

Dynamic Rugby Tackle During Intense Match Action

Draw three horizontal rectangles for Top View, Front View, and Right Side View. Arrange them. Front View is centered in the middle. Top View is directly above the Front View. RHS View is to the right of the Front View.

Technical Drawing Guidelines for Tape Dispenser Views