Detailed Technical Drawing of a Mechanical Component with Dimensions and Features

Here’s a detailed prompt to recreate the given image without directly looking at it: --- "Create a detailed technical drawing of a mechanical component. The component features a base plate with rounded ends and a rectangular slot in the center. On one end, there is a cylindrical structure with a diameter of 60 mm and a height of 60 mm, connected by a slanted rib to the opposite end of the base. The cylindrical structure includes a smaller concentric circle of diameter 40 mm at the top. A vertical hole of 16 mm diameter is located on a rectangular block positioned at the other end of the base. The slot connecting the cylinder to the block has a width of 15 mm, and the rib connecting the cylinder to the base is inclined at an angle. The cutting plane passes longitudinally through the middle of the part, labeled as A-B. The base features rounded corners of radius 10 mm at one end and radius 25 mm at the other. Dimensions are clearly marked, including heights, diameters, and spacing." --- This description should enable someone to recreate the technical drawing. Let me know if you need it refined!, Create a detailed technical drawing of a mechanical component showing a base plate with rounded ends. Include a cylindrical structure with a diameter of 60 mm and a height of 60 mm on one end. Add a slot in the center of the base connecting the cylinder to a rectangular block. Label dimensions clearly