Image Prompt for Flux AI

It Has A Base With Sides Measuring 50 Mm And An Axis Length Of 70 Mm Generator

This image illustrates the measurements for an ebike battery. The dimensions of the battery are clearly marked. From point 1 to point 2 measures 300 mm. From point 2 to point 3 goes up for 222 mm. Then, from point 3, the line extends left to point 4 for 350 mm. Finally, from point 4, the line connects back to point 1, completing the rectangular shape. This clear representation is ideal for understanding ebike battery sizing.

Accurate Ebike Battery Measurement Guide: 300mm x 222mm x 350mm Dimensions

This image shows a detailed orthographic scale drawing of a five-piece furniture set. Each piece features specific dimensions, including height, width, and thickness. Table height is 74 cm, width is 120 cm, thickness 6 cm, with rounded corners of 4-5 cm. Second piece: 67 cm height, 106 cm width, thickness 5 cm, 3-4 cm corners. Third piece: 61 cm height, 94 cm width, 5 cm thickness, 2.5-3.5 cm corners. Fourth piece: 55 cm height, 82 cm width, 4.5 cm thickness, 2-3 cm corners. Smallest piece: 49.5 cm height, 71 cm width, 4 cm thickness, 1.5-2.5 cm corners. The drawing is clear and precise, showing all dimensions.

Orthographic Technical Drawing of Five-Piece Furniture Set with Detailed Dimensions

Create a detailed technical drawing of a mechanical component showing a base plate with rounded ends. Include a cylindrical structure with a diameter of 60 mm and a height of 60 mm on one end. Add a slot in the center of the base connecting the cylinder to a rectangular block. Label dimensions clearly.

Detailed Technical Drawing of a Mechanical Component with Dimensions and Features

Technical drawing illustrates a pentagonal pyramid. Base measures 50 mm. Axis length is 70 mm. Base is on the horizontal plane with one edge perpendicular to the vertical plane. A section plane is shown, inclined at 40 degrees to the horizontal, bisecting the axis. The image includes front view, sectional top view, sectional side view, and true shape of the section.

Technical Drawing of Pentagonal Pyramid with Section Plane

Beige rectangular board displayed with measurement markings. Dimensions indicated clearly. Includes a small tool on the right for reference.

Beige Panel with Measurement Markings for Interior Design and Construction Planning

Detailed orthographic scale drawing of a five-piece furniture set. Each piece has specific dimensions. Table height is 74 cm, width is 120 cm, thickness 6 cm, rounded corners of 4-5 cm. Second piece: 67 cm height, 106 cm width, thickness 5 cm, 3-4 cm corners. Third piece: 61 cm height, 94 cm width, 5 cm thickness, 2.5-3.5 cm corners. Fourth piece: 55 cm height, 82 cm width, 4.5 cm thickness, 2-3 cm corners. Smallest piece: 49.5 cm height, 71 cm width, 4 cm thickness, 1.5-2.5 cm corners.

Orthographic Drawing of a Five-Piece Furniture Set with Detailed Dimensions

Sketch depicts a V-shaped clamp block. Dimensions include 8M and 827me. Technical style showcases precise lines and angles. Background grid highlights measurement.

Technical Sketch of a V-Shaped Clamp Block with Dimensions and Precision Lines

A detailed and symmetrical mechanical structure with a central circular design.

Mechanical Symmetry

Illustration showing dimensions for an ebike battery. Measurements are clearly marked as follows: 300 mm for width, 222 mm for height from point 2 to point 3, 350 mm for length from point 3 to point 4, and final connection back to point 1. A rectangular shape is formed for clarity in battery sizing.

Detailed Technical Drawing of Ebike Battery Measurements with Dimensions

Technical illustration drawing of a holder designed for four 250 ml coffee cups. Dimensions provided for length of 28.0 and width of 12.0 while height is 20.05. Frame supports two cups on each side, with detailed measurements shown.

Detailed Technical Illustration of Coffee Cup Holder for Four 250 ml Cups with Dimensions

Technical drawing of a mechanical component. Cylindrical shape on a rectangular base. Dimensions marked in millimeters. Includes slot and circular protrusion. Notches along the rectangular section. Details height of 30 units and width of 50 units. Side view captures depth and height with protruding notches. Serves as a reference for engineering and architectural projects.

Technical Drawing of Mechanical Component with Detailed Dimensions for Engineering and Architectural Reference

Design features a stand with a screw mechanism to adjust the attached motor and paddle. A vessel is placed on a plate attached to the base, which has an LCD display showing measurement values.

Advanced Laboratory Measurement Device with Motorized Paddle and LCD Display

This image features a measuring tape that is partially rolled out, displaying clear markings that indicate measurements in millimeters. The tape prominently shows the numbers from 1 to 5, with precise increments, making it ideal for measuring objects accurately. The lighting is soft, ensuring that the details on the tape are well-defined and easy to read. The color palette includes silver, black, and white, creating a clean and professional appearance. This image could be used in various contexts, such as construction guides or DIY project tutorials, emphasizing the importance of accurate measurements.

2500 mm Line Measuring Tape with Millimeter Increment - Precision Measurement Tool

Detailed sketch of a G-shaped clamp block. The sketch includes dimensions and presents a technical perspective. Emphasis on precise lines and angles in the design. A grid background indicates measurement accuracy.

Technical Sketch of a G-Shaped Clamp Block with Dimensions and Accurate Perspective

A plastic board with specific dimensions and features. The board thickness is 5mm, width is 8cm, and length is 40cm. Rails are present on the length sides, with a thickness of 3mm and a height of 2.5cm. A hole is located in the middle of the board. The hole is circular, 5mm in diameter, centered at 20cm from the width. A section is cut off for the hole to create a straight line facing the width side, with an arc. The longest distance from the middle of the straight part to the arc measures 4.5mm.

Technical Overview of a Plastic Board with Specific Dimensions and Features

Image features a wooden box with three drawers and removable cutting board. Dimensions are 30 cm long 20 cm wide 10 cm high. Four rubber legs are included for stability.

Compact Wooden Drawer Box with Removable Cutting Board and Rubber Legs

This image is a technical drawing showing a cylindrical stainless steel part. It features various measurements indicating its dimensions. The diameter at the top is 24 mm, while another part has a diameter of approximately 1.5875 mm. The drawing includes a thread specification of 1/2" 14 NPT and indicates the inner diameter as 18 mm. The total length of the part is noted as 200 mm. Clear annotations help in understanding the dimensions and specifications of the component.

Technical Drawing of a Cylindrical Stainless Steel Component with Thread Specifications and Dimensions

Detailed orthographic scale drawing of a five-piece furniture set. Each piece has specific dimensions. Table height is 74 cm, width is 120 cm, thickness 6 cm, rounded corners of 4-5 cm. Second piece: 67 cm height, 106 cm width, thickness 5 cm, 3-4 cm corners. Third piece: 61 cm height, 94 cm width, 5 cm thickness, 2.5-3.5 cm corners. Fourth piece: 55 cm height, 82 cm width, 4.5 cm thickness, 2-3 cm corners. Smallest piece: 49.5 cm height, 71 cm width, 4 cm thickness, 1.5-2.5 cm corners. Clear and precise drawing showing dimensions.

Orthographic Scale Drawing of a Five-Piece Modern Furniture Set with Dimensions

The image presents a technical drawing of a mechanical component. It appears to have a cylindrical shape on top of a rectangular base. The dimensions are clearly marked, with various measurements indicated in millimeters. The drawing includes features such as a slot and a circular protrusion, along with dimensional indications for clarity. This could be part of a larger assembly or a specific machine part, showcasing precision engineering.

Technical Drawing of a Precision Mechanical Component

The image presents a technical drawing of a mechanical component. It features a cylindrical shape atop a rectangular base with clearly marked dimensions in millimeters. The design includes a slot and a circular protrusion, highlighting precision in engineering. Notches are detailed along the rectangular section, and the front view shows its height of 30 units and width of 50 units. The side view captures the depth and height while emphasizing the protruding notches, making it a reliable reference for engineering and architectural projects.

Precision Mechanical Component Technical Drawing with Dimensions and Notches

Sketch of a V-shaped clamp block with dimensions and perspective in technical style. Focus on precise lines and angles. Background grid suggests measurement and accuracy.

Orthographic Drawing of V Clamp Block in Technical Design Style

An automatic hand-caught cake up and down laminating machine with a base. Includes a mounting plate connected to the base. Features unwinding and rewinding rollers. A first motor is attached to one end, with a guide rod and guide roller. The installation plate has a conveyor mechanism and a hot pressing mechanism.

High-Precision Automatic Cake Laminating Machine for Efficient Pastry Production

This image shows a small, handcrafted model, likely made from various materials including wood and black foam. It features a rectangular base with a flat top, possibly representing a piece of machinery or equipment. There are two cylindrical sticks placed horizontally on top, which could symbolize handles or levers. On the front, there are two colored buttons, one red and one green, suggesting a function or control mechanism. The overall design appears to be simplistic, aimed at demonstrating a concept rather than being a fully functional device.

Handcrafted Industrial Model Prototype Featuring Buttons and Levers

Macro photograph of a green microcontroller board. Board features various electronic components and connectors. Dark backdrop adds contrast to the board's details.

Macro Photograph of a Green Microcontroller Board with Electronic Components on Dark Background