From Point 2 To Point 3 Goes Up For 222 Mm Generator

Design a wooden ladder with a total height of 230 cm.

Include two pieces of side rails and eight steps.

Consider step spacing and the angle of the side rails.

This image illustrates the measurements for an ebike battery.

The dimensions of the battery are clearly marked.

From point 1 to point 2 measures 300 mm.

From point 2 to point 3 goes up for 222 mm.

Then,

from point 3,

the line extends left to point 4 for 350 mm.

Finally,

from point 4,

the line connects back to point 1,

completing the rectangular shape.

This clear representation is ideal for understanding ebike battery sizing.

Technical drawing showcases dual-sided e-paper departure board.

E-paper panel has integrated housing.

Dimensions are 42 cm x 40 cm x 10 cm.

Layout is landscape.

Two M10 drilling holes are on the left side.

Size annotations are included.

Draw three horizontal rectangles for Top View,

Front View,

and Right Side View.

Arrange them.

Front View is centered in the middle.

Top View is directly above the Front View.

RHS View is to the right of the Front View.

Design plan for wooden stairs and a ramp.

Stairs height is 18.

2 cm width of 84 cm depth is 30 cm total height reaches 91 cm.

Last stair design noted as 84 over 84.

Draw a corrugated sleeve box without lid.

Box dimensions are 605 mm x 808 mm x 24 mm.

The thickness is 2 mm.

This image is a technical drawing of the Terror Elevator ride.

It includes detailed front,

side,

and top views with accurate dimensions.

The front view features a centered bi-fold door at a height of 2100mm.

The side view illustrates a ramp leading to a raised floor that is 500mm above the ground.

The top view shows a cabin that measures 3000mm x 3000mm within a 3500mm outer cube,

highlighting the door location and wall positioning.

Dimensions are clearly marked for reference,

ensuring thorough understanding of the structure.

The image presents a technical drawing featuring a fillet with a radius of 3/4 inches.

It includes precise measurements for various dimensions,

including a height of 3.

5 inches and width of 7 inches.

The fillet is illustrated with a 37-degree angle,

contributing to the drawing's overall design.

The drawing is detailed,

ensuring accuracy for engineering purposes.

This schematic would be valuable in manufacturing or architectural contexts.

This image features a measuring tape that is partially rolled out,

displaying clear markings that indicate measurements in millimeters.

The tape prominently shows the numbers from 1 to 5,

with precise increments,

making it ideal for measuring objects accurately.

The lighting is soft,

ensuring that the details on the tape are well-defined and easy to read.

The color palette includes silver,

black,

and white,

creating a clean and professional appearance.

This image could be used in various contexts,

such as construction guides or DIY project tutorials,

emphasizing the importance of accurate measurements.

A plastic board with specific dimensions and features.

The board thickness is 5mm,

width is 8cm,

and length is 40cm.

Rails are present on the length sides,

with a thickness of 3mm and a height of 2.

5cm.

A hole is located in the middle of the board.

The hole is circular,

5mm in diameter,

centered at 20cm from the width.

A section is cut off for the hole to create a straight line facing the width side,

with an arc.

The longest distance from the middle of the straight part to the arc measures 4.

5mm.

Technical drawing of a rectangular section with notches.

Height measures 30 units.

Width measures 50 units.

Features 10x10 notches on either side.

Top view shows width of 50 units.

Side view emphasizes height of 30 units and depth of 50 units.

Suitable for engineering and architectural projects.

This image illustrates the optimized pipe delivery process.

It starts with a focus on organizing palletized pipe sections at an initial station.

An automated station follows that cleans and chamfers pipes.

Prefabricated sections with necessary fittings are then moved to the installation site.

A laser level ensures proper alignment during installation.

The final step includes mechanized backfilling and compaction to finish the project.

The image depicts a mechanical assembly of a fork lift shaft with two bearings situated at either end.

It features two lifting sprockets designed to facilitate movement.

Additionally,

there is a driven sprocket which is powered by a motor.

The illustration emphasizes the intricate details of each component in the assembly.

Each element is clearly defined,

providing an informative view for those studying mechanical design or engineering.

Generate a unit circle with specific measurements.

Circle displays angles with a prominent red arrow.

3rd angle projection showing a square with a hole of 25 radius.

Dimensions are labeled around the square.

The drawing is precise and technical in nature.

Technical illustration drawing of a holder designed for four 250 ml coffee cups.

Dimensions provided for length of 28.

0 and width of 12.

0 while height is 20.

05.

Frame supports two cups on each side,

with detailed measurements shown.

Design a wooden ladder with total height 230 cm.

Include 2 pieces of side rails,

8 steps,

step spacing,

and angle of side rails.

Technical drawing of a dual-sided e-paper departure board.

E-paper panel is 13 inches integrated into a housing.

Housing dimensions are 42 cm x 40 cm x 10 cm.

Landscape format with two M10 drilling holes on the left side.

Drawing shows front perspective with size annotations.

Illustration showing dimensions for an ebike battery.

Measurements are clearly marked as follows: 300 mm for width,

222 mm for height from point 2 to point 3,

350 mm for length from point 3 to point 4,

and final connection back to point 1.

A rectangular shape is formed for clarity in battery sizing.

This technical drawing features a rectangular section detailed with notches.

The front view illustrates a height of 30 units and a width of 50 units,

clearly depicting 10x10 notches on either side.

The top view shows the same width of 50 units and a depth that accounts for the notches.

Additionally,

the side view captures a height of 30 units and a depth of 50 units,

emphasizing the notches as protruding features.

This illustration serves as a precise representation for engineering and architectural projects,

beneficial for ensuring accuracy in specifications.

The image depicts a technical drawing of a bevel gear.

The gear is represented in outline form.

The gear design features a 30-degree angle for precise engineering applications.

Carton corrugated sleeve box without lid shown.

Box dimensions are 1200 mm x 600 mm x 150 mm.

Thickness of cardboard is 2 mm.

This technical drawing represents a rectangular section with notches.

The front view shows a height of 30 units and a width of 50 units,

highlighting 10x10 notches on each side.

The top view maintains the same width of 50 units and a depth that includes the notches.

The side view reflects a height of 30 units and a depth of 50 units,

showcasing the notches as protrusions.

This illustration can be utilized in engineering and architectural contexts for precise representation of specifications.

Orthographic projections of a cello tape dispenser showing front view top view RHS LHS details.