7 Mm Fibreboard And 18 Mm Gypsum Board Generator

Simplified two-dimensional cross-section drawing of a soundproof wall.

It shows the arrangement of layers.

Various materials are labeled.

Includes fibreboard,

gypsum board,

resilient channels,

staggered stud frame,

mobile staggered stud,

and finishing drywall.

Color coding highlights each material.

A plastic board with specific dimensions and features.

The board thickness is 5mm,

width is 8cm,

and length is 40cm.

Rails are present on the length sides,

with a thickness of 3mm and a height of 2.

5cm.

A hole is located in the middle of the board.

The hole is circular,

5mm in diameter,

centered at 20cm from the width.

A section is cut off for the hole to create a straight line facing the width side,

with an arc.

The longest distance from the middle of the straight part to the arc measures 4.

5mm.

3D design of a rectangular box with interior partitions.

Dimensions are 17.

5 cm by 20 cm by 6 cm.

Open from the top.

Divided into three sections measuring 5 cm,

5 cm,

and 10 cm.

Vertical sheets create compartments with a clean and sturdy appearance,

resembling cardboard or wood.

Detailed orthographic scale drawing of a five-piece furniture set.

Each piece has specific dimensions.

Table height is 74 cm,

width is 120 cm,

thickness 6 cm,

rounded corners of 4-5 cm.

Second piece: 67 cm height,

106 cm width,

thickness 5 cm,

3-4 cm corners.

Third piece: 61 cm height,

94 cm width,

5 cm thickness,

2.

5-3.

5 cm corners.

Fourth piece: 55 cm height,

82 cm width,

4.

5 cm thickness,

2-3 cm corners.

Smallest piece: 49.

5 cm height,

71 cm width,

4 cm thickness,

1.

5-2.

5 cm corners.

Clear and precise drawing showing dimensions.

2D cross-section of a decoupled wall shown in pencil drawing style.

Foundational wall at base with staggered studs.

Air gap filled with rockwool insulation for soundproofing.

Two colored layers: vibrant yellow and mild green.

Layers include fibreboard attached to gypsum board with green glue,

resilient channels on staggered stud frame,

another fibreboard with green glue to gypsum board,

and finishing drywall.

Clear labels for materials

Design a wooden ladder with total height 230 cm.

Include 2 pieces of side rails,

8 steps,

step spacing,

and angle of side rails.

Design a wooden ladder with a total height of 230 cm.

Include two pieces of side rails and eight steps.

Consider step spacing and the angle of the side rails.

Box designed for food packaging featuring one compartment for liquid and two for bread.

Easily portable for consumers.

This detailed drawing illustrates a 2D cross-section of a staggered stud wall aimed at sound isolation.

The inner layers showcase staggered studs,

which create an air gap and are filled with Rockwool insulation for enhanced sound absorption.

A secondary layer includes 12.

7 mm Fibreboard and 15.

9 mm Gypsum Board,

utilizing Green Glue for additional damping properties.

The outer layer features resilient channels attached to the studs,

providing further acoustic benefits.

Additionally,

another layer of 12.

7 mm fibreboard and 18 mm gypsum board caps the structure.

The drawing emphasizes joint sealants and wooden plates for airtightness,

ensuring maximum soundproofing effectiveness.

It depicts all edges and joints meticulously sealed for optimal performance.

Simplified 2D cross-section drawing of a soundproof wall.

Shows layers including fibreboard,

gypsum board,

green glue,

resilient channels,

staggered stud frame,

mobile staggered stud,

and finishing drywall.

Each material is labeled in distinct colors.

This is a 2D cross-section drawing of a staggered stud wall designed for sound isolation.

The drawing shows multiple layers starting from the inner portion,

including staggered studs creating an air gap.

Rockwool insulation fills the spaces between these studs.

Next,

there’s a secondary layer comprising 12.

7 mm Fibreboard attached to 15.

9 mm Gypsum Board,

using Green Glue for enhanced damping.

The outer layer features resilient channels affixed to the studs,

topped with another layer of 12.

7 mm fibreboard and 18 mm gypsum board.

The drawing also illustrates joint sealants and wooden plates for airtightness.

Lastly,

all joints and edges are carefully sealed to ensure soundproofing efficacy.

This image shows a detailed orthographic scale drawing of a five-piece furniture set.

Each piece features specific dimensions,

including height,

width,

and thickness.

Table height is 74 cm,

width is 120 cm,

thickness 6 cm,

with rounded corners of 4-5 cm.

Second piece: 67 cm height,

106 cm width,

thickness 5 cm,

3-4 cm corners.

Third piece: 61 cm height,

94 cm width,

5 cm thickness,

2.

5-3.

5 cm corners.

Fourth piece: 55 cm height,

82 cm width,

4.

5 cm thickness,

2-3 cm corners.

Smallest piece: 49.

5 cm height,

71 cm width,

4 cm thickness,

1.

5-2.

5 cm corners.

The drawing is clear and precise,

showing all dimensions.

Detailed orthographic scale drawing of a five-piece furniture set.

Each piece has specific dimensions.

Table height is 74 cm,

width is 120 cm,

thickness 6 cm,

rounded corners of 4-5 cm.

Second piece: 67 cm height,

106 cm width,

thickness 5 cm,

3-4 cm corners.

Third piece: 61 cm height,

94 cm width,

5 cm thickness,

2.

5-3.

5 cm corners.

Fourth piece: 55 cm height,

82 cm width,

4.

5 cm thickness,

2-3 cm corners.

Smallest piece: 49.

5 cm height,

71 cm width,

4 cm thickness,

1.

5-2.

5 cm corners.

Technical drawing showcases dual-sided e-paper departure board.

E-paper panel has integrated housing.

Dimensions are 42 cm x 40 cm x 10 cm.

Layout is landscape.

Two M10 drilling holes are on the left side.

Size annotations are included.

This image depicts an orthographic scale drawing of a five-piece furniture set,

designed with specified dimensions for each piece.

The outer table stands at a height of 74 cm and a width of 120 cm,

with a thickness of 6 cm,

featuring rounded corners with a radius of 4-5 cm.

The second piece measures 67 cm in height and 106 cm in width,

with a thickness of 5 cm,

and corners rounded at 3-4 cm.

The third piece is 61 cm tall,

94 cm wide,

and 5 cm thick,

featuring a corner radius of 2.

5-3.

5 cm.

The fourth piece has a height of 55 cm,

width of 82 cm,

and thickness of 4.

5 cm,

with rounded corners of 2-3 cm.

Lastly,

the smallest piece stands at 49.

5 cm high,

71 cm wide,

and 4 cm thick,

with a corner radius of 1.

5-2.

5 cm.

The drawing focuses on clarity and precision,

ensuring all dimensions are readily visible for reference.

Mini golf court made from cardboard designed for indoor play.

Dimensions are 1 to 2 meters in length and 20 to 30 cm in height.

Features themed decorations and obstacles.

Simplified 2D cross-section drawing of a wall showing different layers such as plasterboard,

vapour barrier,

CLT panel,

wool insulation,

air tightness membrane,

wood fibreboard insulation,

breather membrane,

and recycled wood cladding.

This image illustrates a staggered stud wall design standing 8 feet high,

optimized for maximum acoustical isolation.

It features two layers of 2x4 wood framing with interwoven batt insulation.

A resilient furring strip is shown installed every 2 feet horizontally,

which supports a layer of ¾ inch plywood.

A layer of ½ inch gypsum wall board is directly fastened to the plywood on both sides.

Additionally,

the design includes a 1x6 wood finish wall base accentuated with a bullnose top and quarter-round trim at the bottom.

Clear labels indicate the wood framing's top plate and sole plate,

ensuring easy understanding of the construction details.

Beige rectangular board displayed with measurement markings.

Dimensions indicated clearly.

Includes a small tool on the right for reference.

This image depicts a simplified 2D cross-section drawing of a soundproof wall.

The wall includes layers starting with fibreboard attached to gypsum board,

separated by green glue.

The second layer consists of resilient channels attached to a staggered stud frame,

topped with another fibreboard bonded with green glue to a gypsum board.

A finishing drywall layer completes the exterior surface.

Each material is labeled clearly with distinct colors for easy identification.

Carton corrugated sleeve box without lid shown.

Box dimensions are 1200 mm x 600 mm x 150 mm.

Thickness of cardboard is 2 mm.

Design a one-story house section with specific construction details and dimensions.

Include a clear section view.

Label all components with their dimensions.

Use hatching to show material differences.

Design a modern two-house project in Iran.

One house for the North and another for the South or Middle.

Focus on building physics considering orientation,

material,

and climatic factors affecting human comfort.

Box designed for food packaging featuring one compartment for liquid and two for bread.

Easily portable for consumers.