Layers Include Fibreboard Attached To Gypsum Board With Green Glue Generator

Simplified 2D cross-section drawing of a wall showing different layers such as plasterboard,

vapour barrier,

CLT panel,

wool insulation,

air tightness membrane,

wood fibreboard insulation,

breather membrane,

and recycled wood cladding.

This detailed drawing illustrates a 2D cross-section of a staggered stud wall aimed at sound isolation.

The inner layers showcase staggered studs,

which create an air gap and are filled with Rockwool insulation for enhanced sound absorption.

A secondary layer includes 12.

7 mm Fibreboard and 15.

9 mm Gypsum Board,

utilizing Green Glue for additional damping properties.

The outer layer features resilient channels attached to the studs,

providing further acoustic benefits.

Additionally,

another layer of 12.

7 mm fibreboard and 18 mm gypsum board caps the structure.

The drawing emphasizes joint sealants and wooden plates for airtightness,

ensuring maximum soundproofing effectiveness.

It depicts all edges and joints meticulously sealed for optimal performance.

This image displays a technical detail view of a floor acoustic insulation system.

It features multiple layers,

including a concrete base,

several insulating boards,

and a smooth top layer.

The materials are clearly defined with varying colors indicating different properties.

The isometric perspective helps to visualize the thickness and arrangement of each layer.

This illustration is useful for architects and builders designing acoustic solutions in buildings.

This image illustrates a staggered stud wall design standing 8 feet high,

optimized for maximum acoustical isolation.

It features two layers of 2x4 wood framing with interwoven batt insulation.

A resilient furring strip is shown installed every 2 feet horizontally,

which supports a layer of ¾ inch plywood.

A layer of ½ inch gypsum wall board is directly fastened to the plywood on both sides.

Additionally,

the design includes a 1x6 wood finish wall base accentuated with a bullnose top and quarter-round trim at the bottom.

Clear labels indicate the wood framing's top plate and sole plate,

ensuring easy understanding of the construction details.

Network layout showing switches,

Wi-Fi access points,

and hardline devices.

Central switch is Cisco Catalyst MS390-48UX2 with 48 ports.

Wi-Fi APs are PoE+ powered.

Hardline devices include PCs and security cameras.

Fiber patch panel with dual 10 Gbps OM4 uplinks to the switches.

Connections labeled clearly.

An automatic hand-caught cake up and down laminating machine with a base.

Includes a mounting plate connected to the base.

Features unwinding and rewinding rollers.

A first motor is attached to one end,

with a guide rod and guide roller.

The installation plate has a conveyor mechanism and a hot pressing mechanism.

The image showcases a well-designed 4-floor building with a commercial shop on the ground floor and residential apartments on the upper floors.

Each residential unit features balconies adorned with potted greenery,

adding a touch of nature to the facade.

Large glass windows provide ample light and create an inviting appearance.

The ground floor shop area is designed to be accessible,

encouraging foot traffic.

The overall structure combines modern aesthetics with functional design,

making it suitable for urban living.

This image depicts a simplified 2D cross-section drawing of a soundproof wall.

The wall includes layers starting with fibreboard attached to gypsum board,

separated by green glue.

The second layer consists of resilient channels attached to a staggered stud frame,

topped with another fibreboard bonded with green glue to a gypsum board.

A finishing drywall layer completes the exterior surface.

Each material is labeled clearly with distinct colors for easy identification.

This is a 2D cross-section drawing of a staggered stud wall designed for sound isolation.

The drawing shows multiple layers starting from the inner portion,

including staggered studs creating an air gap.

Rockwool insulation fills the spaces between these studs.

Next,

there’s a secondary layer comprising 12.

7 mm Fibreboard attached to 15.

9 mm Gypsum Board,

using Green Glue for enhanced damping.

The outer layer features resilient channels affixed to the studs,

topped with another layer of 12.

7 mm fibreboard and 18 mm gypsum board.

The drawing also illustrates joint sealants and wooden plates for airtightness.

Lastly,

all joints and edges are carefully sealed to ensure soundproofing efficacy.

A plastic board with specific dimensions and features.

The board thickness is 5mm,

width is 8cm,

and length is 40cm.

Rails are present on the length sides,

with a thickness of 3mm and a height of 2.

5cm.

A hole is located in the middle of the board.

The hole is circular,

5mm in diameter,

centered at 20cm from the width.

A section is cut off for the hole to create a straight line facing the width side,

with an arc.

The longest distance from the middle of the straight part to the arc measures 4.

5mm.

Technical drawing of a dual-sided e-paper departure board.

E-paper panel is 13 inches integrated into a housing.

Housing dimensions are 42 cm x 40 cm x 10 cm.

Landscape format with two M10 drilling holes on the left side.

Drawing shows front perspective with size annotations.

Section elevation drawing of a green roof with a grassy hill.

The design shows a relationship with the building structure underneath.

Grass and trees are visible at the top.

Generate detailed architectural sections for the Zin Project building in Bruxelles.

Foundations built using underpinning method with a needle beam and piles.

Drawings show rectangular sections with notches,

height of 30 units,

width of 50 units,

10x10 notches on either side.

Side and top views showcase same width and detailed depth for notches.

Accurate representation for engineering and architectural projects.

Two colleagues engaged in a discussion,

pointing at sticky notes on a glass wall.

Draw three horizontal rectangles for Top View,

Front View,

and Right Side View.

Arrange them.

Front View is centered in the middle.

Top View is directly above the Front View.

RHS View is to the right of the Front View.

Simplified 2D cross-section drawing of a soundproof wall.

Shows layers including fibreboard,

gypsum board,

green glue,

resilient channels,

staggered stud frame,

mobile staggered stud,

and finishing drywall.

Each material is labeled in distinct colors.

2D cross-section of a decoupled wall shown in pencil drawing style.

Foundational wall at base with staggered studs.

Air gap filled with rockwool insulation for soundproofing.

Two colored layers: vibrant yellow and mild green.

Layers include fibreboard attached to gypsum board with green glue,

resilient channels on staggered stud frame,

another fibreboard with green glue to gypsum board,

and finishing drywall.

Clear labels for materials

PLC control panel housing design for industrial applications.

3D model shows front view,

features door and controls.

Placement for DIN rails and trunking indicated.

Suitable for wall mounting.

This image features a 2D cross-section of a decoupled wall illustrated in a basic pencil drawing style.

The foundational wall is depicted at the base with a distinct outline.

Above the main wall,

staggered studs are shown,

creating an air gap filled with rockwool insulation for soundproofing properties.

On the other side of the studs,

two colored layers are represented: one is a vibrant yellow,

and the other appears in a mild green hue,

enhancing the visual interest of the structure.

The overall design captures both the technical aspects and aesthetic considerations in wall design.

Architectural section plan shows detailed view of two-story building layout.

Kitchen,

hall,

and WC are included.

Dimensions and structural components are annotated.

Windows and doors are marked for placement identification.

Staircase connects two floors,

along with interior furnishings.

Several hands are working together on a detailed floor plan,

making notes on a map-like document.

A person stands in front of a whiteboard covered with diagrams and sticky notes.

Design of a chicken cage house featuring mesh wire walls and galvalum frame.

It includes 20 compartments,

each measuring 1m x 1m x 0.

6m.

The structure has 5 floors,

each with a height of 0.

6m,

and overall height of 3m,

width of 1m,

and length of 4m.