Image Prompt for Flux AI

7 Mm Fibreboard Attached To 15 Generator

A plastic board with specific dimensions and features. The board thickness is 5mm, width is 8cm, and length is 40cm. Rails are present on the length sides, with a thickness of 3mm and a height of 2.5cm. A hole is located in the middle of the board. The hole is circular, 5mm in diameter, centered at 20cm from the width. A section is cut off for the hole to create a straight line facing the width side, with an arc. The longest distance from the middle of the straight part to the arc measures 4.5mm.

Technical Overview of a Plastic Board with Specific Dimensions and Features

3D design of a rectangular box with interior partitions. Dimensions are 17.5 cm by 20 cm by 6 cm. Open from the top. Divided into three sections measuring 5 cm, 5 cm, and 10 cm. Vertical sheets create compartments with a clean and sturdy appearance, resembling cardboard or wood.

3D Render of a Functional Rectangular Box Design with Interior Partitions

Beige rectangular board displayed with measurement markings. Dimensions indicated clearly. Includes a small tool on the right for reference.

Beige Panel with Measurement Markings for Interior Design and Construction Planning

Design a wooden ladder with total height 230 cm. Include 2 pieces of side rails, 8 steps, step spacing, and angle of side rails.

DIY Wooden Ladder Design with Dimensions and Assembly Instructions

Draw three horizontal rectangles for Top View, Front View, and Right Side View. Arrange them. Front View is centered in the middle. Top View is directly above the Front View. RHS View is to the right of the Front View.

Technical Drawing Guidelines for Tape Dispenser Views

Orthographic projections of a cello tape dispenser are displayed. The design includes front view, top view, right-hand side view, and left-hand side view. Details of the structure are shown clearly.

Orthographic Projections of a Cello Tape Dispenser with Detailed Views and Measurements

Orthographic projections of a cello tape dispenser showing front view top view RHS LHS details.

Orthographic Projections of Cello Tape Dispenser Technical Drawing Design

Image of a power supply PCB showing various electronic components like capacitors, microcontrollers, and resistors on a green board.

Detailed Overview of a Power Supply PCB Design with Electronic Components

Image features a wooden box with three drawers and removable cutting board. Dimensions are 30 cm long 20 cm wide 10 cm high. Four rubber legs are included for stability.

Compact Wooden Drawer Box with Removable Cutting Board and Rubber Legs

Detailed orthographic scale drawing of a five-piece furniture set. Each piece has specific dimensions. Table height is 74 cm, width is 120 cm, thickness 6 cm, rounded corners of 4-5 cm. Second piece: 67 cm height, 106 cm width, thickness 5 cm, 3-4 cm corners. Third piece: 61 cm height, 94 cm width, 5 cm thickness, 2.5-3.5 cm corners. Fourth piece: 55 cm height, 82 cm width, 4.5 cm thickness, 2-3 cm corners. Smallest piece: 49.5 cm height, 71 cm width, 4 cm thickness, 1.5-2.5 cm corners. Clear and precise drawing showing dimensions.

Orthographic Scale Drawing of a Five-Piece Modern Furniture Set with Dimensions

This image depicts an orthographic scale drawing of a five-piece furniture set, designed with specified dimensions for each piece. The outer table stands at a height of 74 cm and a width of 120 cm, with a thickness of 6 cm, featuring rounded corners with a radius of 4-5 cm. The second piece measures 67 cm in height and 106 cm in width, with a thickness of 5 cm, and corners rounded at 3-4 cm. The third piece is 61 cm tall, 94 cm wide, and 5 cm thick, featuring a corner radius of 2.5-3.5 cm. The fourth piece has a height of 55 cm, width of 82 cm, and thickness of 4.5 cm, with rounded corners of 2-3 cm. Lastly, the smallest piece stands at 49.5 cm high, 71 cm wide, and 4 cm thick, with a corner radius of 1.5-2.5 cm. The drawing focuses on clarity and precision, ensuring all dimensions are readily visible for reference.

Orthographic Scale Drawing of Five-Piece Furniture Set with Detailed Dimensions

Draw a corrugated sleeve box without lid. Box dimensions are 605 mm x 808 mm x 24 mm. The thickness is 2 mm.

Corrugated Cardboard Sleeve Box Without Lid - Dimensions 605mm x 808mm x 24mm

Technical drawing showcases dual-sided e-paper departure board. E-paper panel has integrated housing. Dimensions are 42 cm x 40 cm x 10 cm. Layout is landscape. Two M10 drilling holes are on the left side. Size annotations are included.

Technical Drawing of Dual-Sided E-Paper Departure Board Dimensions and Features

Illustration of a pentagonal plate with dimensions. One corner on horizontal plane. Plane inclined at thirty degrees to HP. Opposite side inclined at forty-five degrees to the vertical plane. Projection lines clearly marked.

Projection of a pentagonal plate inclined at 30° to the horizontal plane with detailed dimensions

This detailed drawing illustrates a 2D cross-section of a staggered stud wall aimed at sound isolation. The inner layers showcase staggered studs, which create an air gap and are filled with Rockwool insulation for enhanced sound absorption. A secondary layer includes 12.7 mm Fibreboard and 15.9 mm Gypsum Board, utilizing Green Glue for additional damping properties. The outer layer features resilient channels attached to the studs, providing further acoustic benefits. Additionally, another layer of 12.7 mm fibreboard and 18 mm gypsum board caps the structure. The drawing emphasizes joint sealants and wooden plates for airtightness, ensuring maximum soundproofing effectiveness. It depicts all edges and joints meticulously sealed for optimal performance.

Staggered Stud Wall Cross-section for Optimal Sound Isolation

This technical drawing represents a rectangular section with notches. The front view shows a height of 30 units and a width of 50 units, highlighting 10x10 notches on each side. The top view maintains the same width of 50 units and a depth that includes the notches. The side view reflects a height of 30 units and a depth of 50 units, showcasing the notches as protrusions. This illustration can be utilized in engineering and architectural contexts for precise representation of specifications.

Orthographic Technical Drawing of a Rectangular Section with Notches

Carton corrugated sleeve box without lid shown. Box dimensions are 1200 mm x 600 mm x 150 mm. Thickness of cardboard is 2 mm.

Durable Corrugated Cardboard Sleeve Box – Dimensions 1200mm x 600mm x 150mm

This image shows a detailed orthographic scale drawing of a five-piece furniture set. Each piece features specific dimensions, including height, width, and thickness. Table height is 74 cm, width is 120 cm, thickness 6 cm, with rounded corners of 4-5 cm. Second piece: 67 cm height, 106 cm width, thickness 5 cm, 3-4 cm corners. Third piece: 61 cm height, 94 cm width, 5 cm thickness, 2.5-3.5 cm corners. Fourth piece: 55 cm height, 82 cm width, 4.5 cm thickness, 2-3 cm corners. Smallest piece: 49.5 cm height, 71 cm width, 4 cm thickness, 1.5-2.5 cm corners. The drawing is clear and precise, showing all dimensions.

Orthographic Technical Drawing of Five-Piece Furniture Set with Detailed Dimensions

Technical drawing of a dual-sided e-paper departure board. E-paper panel is 13 inches integrated into a housing. Housing dimensions are 42 cm x 40 cm x 10 cm. Landscape format with two M10 drilling holes on the left side. Drawing shows front perspective with size annotations.

Technical Drawing of Dual-Sided E-Paper Departure Board with Dimensions and Drilling Holes

Detailed orthographic scale drawing of a five-piece furniture set. Each piece has specific dimensions. Table height is 74 cm, width is 120 cm, thickness 6 cm, rounded corners of 4-5 cm. Second piece: 67 cm height, 106 cm width, thickness 5 cm, 3-4 cm corners. Third piece: 61 cm height, 94 cm width, 5 cm thickness, 2.5-3.5 cm corners. Fourth piece: 55 cm height, 82 cm width, 4.5 cm thickness, 2-3 cm corners. Smallest piece: 49.5 cm height, 71 cm width, 4 cm thickness, 1.5-2.5 cm corners.

Orthographic Drawing of a Five-Piece Furniture Set with Detailed Dimensions

Schematic diagram for a wooden fence. Overall dimensions show length height and elevation. Includes detailed components such as vertical posts and panel types. Solid slatted panels follow a specific arrangement with measurements. Visual layout provides guidance on placement of materials. Clear representation of posts and panels.

DIY Wooden Fence Schematic Diagram - Detailed Guide with Dimensions and Components

Guitar body template A combination of Strandberg 7 strings guitar design with Syu features from Galnerus and a star shaped design.

Custom Strandberg and Syu Inspired 7 String Electric Guitar Design

Design a wooden ladder with a total height of 230 cm. Include two pieces of side rails and eight steps. Consider step spacing and the angle of the side rails.

Custom Wooden Ladder Design with 230 cm Height and 8 Steps

A modern bookcase in a bright room. The bookcase is made of plywood with a teak stain. It features five modules for displaying books. The middle module holds a 32-inch TV. The lower section has closed cabinets with smooth plywood fronts. The design reflects Danish style furniture from the 1960s. The bookcase has a built-in wall effect.

Modern Teak Plywood Bookcase with Integrated TV for Stylish Living Room