9 Mm Gypsum Board Generator

Simplified two-dimensional cross-section drawing of a soundproof wall.

It shows the arrangement of layers.

Various materials are labeled.

Includes fibreboard,

gypsum board,

resilient channels,

staggered stud frame,

mobile staggered stud,

and finishing drywall.

Color coding highlights each material.

This image illustrates a staggered stud wall design standing 8 feet high,

optimized for maximum acoustical isolation.

It features two layers of 2x4 wood framing with interwoven batt insulation.

A resilient furring strip is shown installed every 2 feet horizontally,

which supports a layer of ¾ inch plywood.

A layer of ½ inch gypsum wall board is directly fastened to the plywood on both sides.

Additionally,

the design includes a 1x6 wood finish wall base accentuated with a bullnose top and quarter-round trim at the bottom.

Clear labels indicate the wood framing's top plate and sole plate,

ensuring easy understanding of the construction details.

A plastic board with specific dimensions and features.

The board thickness is 5mm,

width is 8cm,

and length is 40cm.

Rails are present on the length sides,

with a thickness of 3mm and a height of 2.

5cm.

A hole is located in the middle of the board.

The hole is circular,

5mm in diameter,

centered at 20cm from the width.

A section is cut off for the hole to create a straight line facing the width side,

with an arc.

The longest distance from the middle of the straight part to the arc measures 4.

5mm.

Simplified 2D cross-section drawing of an exterior wall.

Indicates 0.

5 inches of exterior sheathing,

1 inch rigid foam insulation,

0.

05 inches weather barrier,

and 0.

5 inches stucco finish.

A joint in the ceiling where drywall sheets meet.

There is a hairline crack at the seam.

Movement in the building can cause these cracks.

The image features a whimsical,

3D representation of a gun inspired by the Glock model.

The design is unique,

with a soft,

paper-like texture and vibrant colors.

The gun showcases a playful mix of light beige on the top,

dark blue on the body,

and soft red on the grip.

This artistic representation focuses on fun rather than realism,

making it suitable for children or as a decorative piece.

It captures the imagination while promoting safety and creativity in toy design.

Design a modern two-house project in Iran.

One house for the North and another for the South or Middle.

Focus on building physics considering orientation,

material,

and climatic factors affecting human comfort.

Carton corrugated sleeve box without lid shown.

Box dimensions are 1200 mm x 600 mm x 150 mm.

Thickness of cardboard is 2 mm.

Simplified 2D cross-section drawing of a soundproof wall.

Shows layers including fibreboard,

gypsum board,

green glue,

resilient channels,

staggered stud frame,

mobile staggered stud,

and finishing drywall.

Each material is labeled in distinct colors.

Simplified 2D cross-section drawing of a wall showing different layers such as plasterboard,

vapour barrier,

CLT panel,

wool insulation,

air tightness membrane,

wood fibreboard insulation,

breather membrane,

and recycled wood cladding.

This is a 2D cross-section drawing of a staggered stud wall designed for sound isolation.

The drawing shows multiple layers starting from the inner portion,

including staggered studs creating an air gap.

Rockwool insulation fills the spaces between these studs.

Next,

there’s a secondary layer comprising 12.

7 mm Fibreboard attached to 15.

9 mm Gypsum Board,

using Green Glue for enhanced damping.

The outer layer features resilient channels affixed to the studs,

topped with another layer of 12.

7 mm fibreboard and 18 mm gypsum board.

The drawing also illustrates joint sealants and wooden plates for airtightness.

Lastly,

all joints and edges are carefully sealed to ensure soundproofing efficacy.

A printed circuit board designed for remote control.

The board features components suitable for GSM applications with four relay switches.

The input voltage range is 12-24V.

The design is meant to be functional and clear.

This image shows a detailed orthographic scale drawing of a five-piece furniture set.

Each piece features specific dimensions,

including height,

width,

and thickness.

Table height is 74 cm,

width is 120 cm,

thickness 6 cm,

with rounded corners of 4-5 cm.

Second piece: 67 cm height,

106 cm width,

thickness 5 cm,

3-4 cm corners.

Third piece: 61 cm height,

94 cm width,

5 cm thickness,

2.

5-3.

5 cm corners.

Fourth piece: 55 cm height,

82 cm width,

4.

5 cm thickness,

2-3 cm corners.

Smallest piece: 49.

5 cm height,

71 cm width,

4 cm thickness,

1.

5-2.

5 cm corners.

The drawing is clear and precise,

showing all dimensions.

Technical drawing showcases dual-sided e-paper departure board.

E-paper panel has integrated housing.

Dimensions are 42 cm x 40 cm x 10 cm.

Layout is landscape.

Two M10 drilling holes are on the left side.

Size annotations are included.

Schematic view of the punch-out method for minimum-mass targets.

Target material is on the substrate film.

Punch-out laser pulse irradiates the back surface of the transparent substrate.

Tinfoil is ablated,

creating tin plasma at the boundary.

Remaining tinfoil is driven to high velocity by expanding plasma.

Detailed orthographic scale drawing of a five-piece furniture set.

Each piece has specific dimensions.

Table height is 74 cm,

width is 120 cm,

thickness 6 cm,

rounded corners of 4-5 cm.

Second piece: 67 cm height,

106 cm width,

thickness 5 cm,

3-4 cm corners.

Third piece: 61 cm height,

94 cm width,

5 cm thickness,

2.

5-3.

5 cm corners.

Fourth piece: 55 cm height,

82 cm width,

4.

5 cm thickness,

2-3 cm corners.

Smallest piece: 49.

5 cm height,

71 cm width,

4 cm thickness,

1.

5-2.

5 cm corners.

This is a 2D cross-section drawing of a staggered stud wall designed for sound isolation.

The drawing shows multiple layers starting from the inner portion,

including staggered studs creating an air gap.

Rockwool insulation fills the spaces between these studs.

Next,

there’s a secondary layer comprising 12.

7 mm Fibreboard attached to 15.

9 mm Gypsum Board,

using Green Glue for enhanced damping.

The outer layer features resilient channels affixed to the studs,

topped with another layer of 12.

7 mm fibreboard and 18 mm gypsum board.

The drawing also illustrates joint sealants and wooden plates for airtightness.

Lastly,

all joints and edges are carefully sealed to ensure soundproofing efficacy.

This image depicts a simplified 2D cross-section drawing of a soundproof wall.

The wall includes layers starting with fibreboard attached to gypsum board,

separated by green glue.

The second layer consists of resilient channels attached to a staggered stud frame,

topped with another fibreboard bonded with green glue to a gypsum board.

A finishing drywall layer completes the exterior surface.

Each material is labeled clearly with distinct colors for easy identification.

2D cross-section of a decoupled wall shown in pencil drawing style.

Foundational wall at base with staggered studs.

Air gap filled with rockwool insulation for soundproofing.

Two colored layers: vibrant yellow and mild green.

Layers include fibreboard attached to gypsum board with green glue,

resilient channels on staggered stud frame,

another fibreboard with green glue to gypsum board,

and finishing drywall.

Clear labels for materials

Mini golf court made from cardboard designed for indoor play.

Dimensions are 1 to 2 meters in length and 20 to 30 cm in height.

Features themed decorations and obstacles.

3D design of a rectangular box with interior partitions.

Dimensions are 17.

5 cm by 20 cm by 6 cm.

Open from the top.

Divided into three sections measuring 5 cm,

5 cm,

and 10 cm.

Vertical sheets create compartments with a clean and sturdy appearance,

resembling cardboard or wood.

A 60 by 120 feet tent located on a football field.

The tent features seating arrangements underneath.

There are 10 round tables with chairs placed outside the tent.

23 children play in an underground bunker.

Children wear military attire.

Weapons and ammunition crates stored near walls.

Concrete walls are grey and rough.

Children are involved in a game.

Area outside experiences artillery bombardment.

They exhibit laughter and joy during play.