Total Width Of Slatted Panels 2 Times 88 Generator

Technical drawing of a rectangular section with notches.

Height measures 30 units.

Width measures 50 units.

Features 10x10 notches on either side.

Top view shows width of 50 units.

Side view emphasizes height of 30 units and depth of 50 units.

Suitable for engineering and architectural projects.

This detailed drawing illustrates a 2D cross-section of a staggered stud wall aimed at sound isolation.

The inner layers showcase staggered studs,

which create an air gap and are filled with Rockwool insulation for enhanced sound absorption.

A secondary layer includes 12.

7 mm Fibreboard and 15.

9 mm Gypsum Board,

utilizing Green Glue for additional damping properties.

The outer layer features resilient channels attached to the studs,

providing further acoustic benefits.

Additionally,

another layer of 12.

7 mm fibreboard and 18 mm gypsum board caps the structure.

The drawing emphasizes joint sealants and wooden plates for airtightness,

ensuring maximum soundproofing effectiveness.

It depicts all edges and joints meticulously sealed for optimal performance.

Design of a chicken cage house featuring mesh wire walls and galvalum frame.

It includes 20 compartments,

each measuring 1m x 1m x 0.

6m.

The structure has 5 floors,

each with a height of 0.

6m,

and overall height of 3m,

width of 1m,

and length of 4m.

This technical drawing features a rectangular section detailed with notches.

The front view illustrates a height of 30 units and a width of 50 units,

clearly depicting 10x10 notches on either side.

The top view shows the same width of 50 units and a depth that accounts for the notches.

Additionally,

the side view captures a height of 30 units and a depth of 50 units,

emphasizing the notches as protruding features.

This illustration serves as a precise representation for engineering and architectural projects,

beneficial for ensuring accuracy in specifications.

A plastic board with specific dimensions and features.

The board thickness is 5mm,

width is 8cm,

and length is 40cm.

Rails are present on the length sides,

with a thickness of 3mm and a height of 2.

5cm.

A hole is located in the middle of the board.

The hole is circular,

5mm in diameter,

centered at 20cm from the width.

A section is cut off for the hole to create a straight line facing the width side,

with an arc.

The longest distance from the middle of the straight part to the arc measures 4.

5mm.

This image illustrates a staggered stud wall design standing 8 feet high,

optimized for maximum acoustical isolation.

It features two layers of 2x4 wood framing with interwoven batt insulation.

A resilient furring strip is shown installed every 2 feet horizontally,

which supports a layer of ¾ inch plywood.

A layer of ½ inch gypsum wall board is directly fastened to the plywood on both sides.

Additionally,

the design includes a 1x6 wood finish wall base accentuated with a bullnose top and quarter-round trim at the bottom.

Clear labels indicate the wood framing's top plate and sole plate,

ensuring easy understanding of the construction details.

3D model converted into a sectional drawing.

Varied line weights used to show depth.

Thicker lines denote closer objects.

With precise line work,

details highlighted on tables and cylindrical sections.

Walls and structural elements defined with hatch patterns.

Clear separation between different planes enhances depth and spatial arrangement.

Drawing shows rectangular section with notches,

front view height of 30 units and width of 50 units,

notches on each side.

Top view width of 50 units,

depth with notches.

Side view height of 30 units and depth of 50 units,

notches as protrusions.

Suitable for engineering and architectural contexts.

Elevation design for an exterior wall with dimensions of 18 feet width and 33 feet height.

The front view shows a modern home featuring several windows and a balcony.

Schematic diagram for a wooden fence.

Overall dimensions show length height and elevation.

Includes detailed components such as vertical posts and panel types.

Solid slatted panels follow a specific arrangement with measurements.

Visual layout provides guidance on placement of materials.

Clear representation of posts and panels.

This technical drawing represents a rectangular section with notches.

The front view shows a height of 30 units and a width of 50 units,

highlighting 10x10 notches on each side.

The top view maintains the same width of 50 units and a depth that includes the notches.

The side view reflects a height of 30 units and a depth of 50 units,

showcasing the notches as protrusions.

This illustration can be utilized in engineering and architectural contexts for precise representation of specifications.

Design plan for wooden stairs and a ramp.

Stairs height is 18.

2 cm width of 84 cm depth is 30 cm total height reaches 91 cm.

Last stair design noted as 84 over 84.

This is a 2D cross-section drawing of a staggered stud wall designed for sound isolation.

The drawing shows multiple layers starting from the inner portion,

including staggered studs creating an air gap.

Rockwool insulation fills the spaces between these studs.

Next,

there’s a secondary layer comprising 12.

7 mm Fibreboard attached to 15.

9 mm Gypsum Board,

using Green Glue for enhanced damping.

The outer layer features resilient channels affixed to the studs,

topped with another layer of 12.

7 mm fibreboard and 18 mm gypsum board.

The drawing also illustrates joint sealants and wooden plates for airtightness.

Lastly,

all joints and edges are carefully sealed to ensure soundproofing efficacy.

Draw a corrugated sleeve box without lid.

Box dimensions are 605 mm x 808 mm x 24 mm.

The thickness is 2 mm.

Kitchen island on wheels features butcher block table top.

Designed with two slatted shelves for storage.

Dimensions are 100cm long and 60cm wide.

Slats width is 10cm.

Constructed in oak.

Simplified 2D cross-section drawing of a wall showing different layers such as plasterboard,

vapour barrier,

CLT panel,

wool insulation,

air tightness membrane,

wood fibreboard insulation,

breather membrane,

and recycled wood cladding.

Carton corrugated sleeve box without lid shown.

Box dimensions are 1200 mm x 600 mm x 150 mm.

Thickness of cardboard is 2 mm.

Modern double door shutters in grey and beige color.

Grey up to 2 feet height and beige on the left out area with black modern door handles.

Beige rectangular board displayed with measurement markings.

Dimensions indicated clearly.

Includes a small tool on the right for reference.

Floor plan of two 2 BHK apartments occupying 300 square yards.

Includes main entrance,

hall,

dining room,

bedrooms,

bathrooms,

lift space,

and staircase.

Shows room dimensions clearly.

Elevation design for an exterior wall with specific dimensions of 18 feet width and 33 feet height.

Front view of a modern home showing windows and a balcony.

This image showcases a beautifully designed gravel path measuring 64 ft by 3 ft.

The path is lined with two rows of 16 inch by 16 inch concrete slabs.

It is surrounded by well-maintained gravel and neatly trimmed grass.

This visually appealing layout enhances outdoor spaces and offers a practical walkway.

Ideal for gardens and landscape projects,

this path integrates natural elements and modern design.

Design a wooden ladder with a total height of 230 cm.

Include two pieces of side rails and eight steps.

Consider step spacing and the angle of the side rails.

Orthographic projections of a cello tape dispenser are displayed.

The design includes front view,

top view,

right-hand side view,

and left-hand side view.

Details of the structure are shown clearly.

This image shows a detailed orthographic scale drawing of a five-piece furniture set.

Each piece features specific dimensions,

including height,

width,

and thickness.

Table height is 74 cm,

width is 120 cm,

thickness 6 cm,

with rounded corners of 4-5 cm.

Second piece: 67 cm height,

106 cm width,

thickness 5 cm,

3-4 cm corners.

Third piece: 61 cm height,

94 cm width,

5 cm thickness,

2.

5-3.

5 cm corners.

Fourth piece: 55 cm height,

82 cm width,

4.

5 cm thickness,

2-3 cm corners.

Smallest piece: 49.

5 cm height,

71 cm width,

4 cm thickness,

1.

5-2.

5 cm corners.

The drawing is clear and precise,

showing all dimensions.