2 Cm Add The Second Slatted Panel 88 Generator

Modern double door shutters in grey and beige color.

Grey up to 2 feet height and beige on the left out area with black modern door handles.

Design a wooden ladder with a total height of 230 cm.

Include two pieces of side rails and eight steps.

Consider step spacing and the angle of the side rails.

A plastic board with specific dimensions and features.

The board thickness is 5mm,

width is 8cm,

and length is 40cm.

Rails are present on the length sides,

with a thickness of 3mm and a height of 2.

5cm.

A hole is located in the middle of the board.

The hole is circular,

5mm in diameter,

centered at 20cm from the width.

A section is cut off for the hole to create a straight line facing the width side,

with an arc.

The longest distance from the middle of the straight part to the arc measures 4.

5mm.

Elevator door is solid black.

Glass panel designed with vibrant colors in mosaic pattern.

Matte finish for a contemporary look.

The panel is centrally located and occupies 50-70% of the door height.

Additional features include modern handles and potential backlighting.

Gothic mansion designed for stage production.

Features gothic windows and levels.

Includes staircases.

Decorated with medieval weaponry and cobwebs.

Built in multiple joinable pieces.

This technical drawing represents a rectangular section with notches.

The front view shows a height of 30 units and a width of 50 units,

highlighting 10x10 notches on each side.

The top view maintains the same width of 50 units and a depth that includes the notches.

The side view reflects a height of 30 units and a depth of 50 units,

showcasing the notches as protrusions.

This illustration can be utilized in engineering and architectural contexts for precise representation of specifications.

Orthographic projections of a cello tape dispenser are displayed.

The design includes front view,

top view,

right-hand side view,

and left-hand side view.

Details of the structure are shown clearly.

Image features a wooden box with three drawers and removable cutting board.

Dimensions are 30 cm long 20 cm wide 10 cm high.

Four rubber legs are included for stability.

Carton corrugated sleeve box without lid shown.

Box dimensions are 1200 mm x 600 mm x 150 mm.

Thickness of cardboard is 2 mm.

Design plan for wooden stairs and a ramp.

Stairs height is 18.

2 cm width of 84 cm depth is 30 cm total height reaches 91 cm.

Last stair design noted as 84 over 84.

Technical drawing of a rectangular section with notches.

Height measures 30 units.

Width measures 50 units.

Features 10x10 notches on either side.

Top view shows width of 50 units.

Side view emphasizes height of 30 units and depth of 50 units.

Suitable for engineering and architectural projects.

An automatic hand-caught cake up and down laminating machine with a base.

Includes a mounting plate connected to the base.

Features unwinding and rewinding rollers.

A first motor is attached to one end,

with a guide rod and guide roller.

The installation plate has a conveyor mechanism and a hot pressing mechanism.

This is a 2D cross-section drawing of a staggered stud wall designed for sound isolation.

The drawing shows multiple layers starting from the inner portion,

including staggered studs creating an air gap.

Rockwool insulation fills the spaces between these studs.

Next,

there’s a secondary layer comprising 12.

7 mm Fibreboard attached to 15.

9 mm Gypsum Board,

using Green Glue for enhanced damping.

The outer layer features resilient channels affixed to the studs,

topped with another layer of 12.

7 mm fibreboard and 18 mm gypsum board.

The drawing also illustrates joint sealants and wooden plates for airtightness.

Lastly,

all joints and edges are carefully sealed to ensure soundproofing efficacy.

Orthographic projections of a cello tape dispenser showing front view top view RHS LHS details.

This image depicts a simplified 2D cross-section drawing of a soundproof wall.

The wall includes layers starting with fibreboard attached to gypsum board,

separated by green glue.

The second layer consists of resilient channels attached to a staggered stud frame,

topped with another fibreboard bonded with green glue to a gypsum board.

A finishing drywall layer completes the exterior surface.

Each material is labeled clearly with distinct colors for easy identification.

The image showcases a modern bedroom with a sleek wooden wardrobe featuring sliding doors.

The wardrobe has a stylish design with a black and patterned white panel in the center,

giving it a contemporary look.

The room is softly lit by natural light streaming in through sheer white curtains covering a large window,

creating a calm and inviting atmosphere.

Draw a corrugated sleeve box without lid.

Box dimensions are 605 mm x 808 mm x 24 mm.

The thickness is 2 mm.

Design a wooden ladder with total height 230 cm.

Include 2 pieces of side rails,

8 steps,

step spacing,

and angle of side rails.

This detailed drawing illustrates a 2D cross-section of a staggered stud wall aimed at sound isolation.

The inner layers showcase staggered studs,

which create an air gap and are filled with Rockwool insulation for enhanced sound absorption.

A secondary layer includes 12.

7 mm Fibreboard and 15.

9 mm Gypsum Board,

utilizing Green Glue for additional damping properties.

The outer layer features resilient channels attached to the studs,

providing further acoustic benefits.

Additionally,

another layer of 12.

7 mm fibreboard and 18 mm gypsum board caps the structure.

The drawing emphasizes joint sealants and wooden plates for airtightness,

ensuring maximum soundproofing effectiveness.

It depicts all edges and joints meticulously sealed for optimal performance.

Beige rectangular board displayed with measurement markings.

Dimensions indicated clearly.

Includes a small tool on the right for reference.

Kitchen island on wheels features butcher block table top.

Designed with two slatted shelves for storage.

Dimensions are 100cm long and 60cm wide.

Slats width is 10cm.

Constructed in oak.

This image showcases a modern storage wardrobe that stands 8 feet tall and is 5 feet wide,

perfect for any home.

The wardrobe features a sleek gray finish and includes a spacious interior with hanging rods and shelves for maximum organization.

The design is ideal for those needing additional storage without occupying too much space.

Its dimensions also highlight its 20-inch depth,

providing ample room for clothes and accessories.

Natural lighting enhances the aesthetic,

making it a suitable addition to any room in the house.

Design of a chicken cage house featuring mesh wire walls and galvalum frame.

It includes 20 compartments,

each measuring 1m x 1m x 0.

6m.

The structure has 5 floors,

each with a height of 0.

6m,

and overall height of 3m,

width of 1m,

and length of 4m.

A suspension control arm made of .

125 inch thick sheet metal.

Metal cut flat and bent into shape and welded.

Focus on details of the metallic structure.