2 Cm Add The Second Solid Panel 92 Generator

Draw a corrugated sleeve box without lid.

Box dimensions are 605 mm x 808 mm x 24 mm.

The thickness is 2 mm.

This is a 2D cross-section drawing of a staggered stud wall designed for sound isolation.

The drawing shows multiple layers starting from the inner portion,

including staggered studs creating an air gap.

Rockwool insulation fills the spaces between these studs.

Next,

there’s a secondary layer comprising 12.

7 mm Fibreboard attached to 15.

9 mm Gypsum Board,

using Green Glue for enhanced damping.

The outer layer features resilient channels affixed to the studs,

topped with another layer of 12.

7 mm fibreboard and 18 mm gypsum board.

The drawing also illustrates joint sealants and wooden plates for airtightness.

Lastly,

all joints and edges are carefully sealed to ensure soundproofing efficacy.

This image depicts a simplified 2D cross-section drawing of a soundproof wall.

The wall includes layers starting with fibreboard attached to gypsum board,

separated by green glue.

The second layer consists of resilient channels attached to a staggered stud frame,

topped with another fibreboard bonded with green glue to a gypsum board.

A finishing drywall layer completes the exterior surface.

Each material is labeled clearly with distinct colors for easy identification.

Elevator door is solid black.

Glass panel designed with vibrant colors in mosaic pattern.

Matte finish for a contemporary look.

The panel is centrally located and occupies 50-70% of the door height.

Additional features include modern handles and potential backlighting.

This image illustrates a staggered stud wall design standing 8 feet high,

optimized for maximum acoustical isolation.

It features two layers of 2x4 wood framing with interwoven batt insulation.

A resilient furring strip is shown installed every 2 feet horizontally,

which supports a layer of ¾ inch plywood.

A layer of ½ inch gypsum wall board is directly fastened to the plywood on both sides.

Additionally,

the design includes a 1x6 wood finish wall base accentuated with a bullnose top and quarter-round trim at the bottom.

Clear labels indicate the wood framing's top plate and sole plate,

ensuring easy understanding of the construction details.

Technical illustration drawing of a holder designed for four 250 ml coffee cups.

Dimensions provided for length of 28.

0 and width of 12.

0 while height is 20.

05.

Frame supports two cups on each side,

with detailed measurements shown.

Box designed for food packaging featuring one compartment for liquid and two for bread.

Easily portable for consumers.

3D model converted into a sectional drawing.

Varied line weights used to show depth.

Thicker lines denote closer objects.

With precise line work,

details highlighted on tables and cylindrical sections.

Walls and structural elements defined with hatch patterns.

Clear separation between different planes enhances depth and spatial arrangement.

Drawing shows rectangular section with notches,

front view height of 30 units and width of 50 units,

notches on each side.

Top view width of 50 units,

depth with notches.

Side view height of 30 units and depth of 50 units,

notches as protrusions.

Suitable for engineering and architectural contexts.

Carton corrugated sleeve box without lid shown.

Box dimensions are 1200 mm x 600 mm x 150 mm.

Thickness of cardboard is 2 mm.

Design plan for wooden stairs and a ramp.

Stairs height is 18.

2 cm width of 84 cm depth is 30 cm total height reaches 91 cm.

Last stair design noted as 84 over 84.

PLC control panel housing design for industrial applications.

3D model shows front view,

features door and controls.

Placement for DIN rails and trunking indicated.

Suitable for wall mounting.

This detailed drawing illustrates a 2D cross-section of a staggered stud wall aimed at sound isolation.

The inner layers showcase staggered studs,

which create an air gap and are filled with Rockwool insulation for enhanced sound absorption.

A secondary layer includes 12.

7 mm Fibreboard and 15.

9 mm Gypsum Board,

utilizing Green Glue for additional damping properties.

The outer layer features resilient channels attached to the studs,

providing further acoustic benefits.

Additionally,

another layer of 12.

7 mm fibreboard and 18 mm gypsum board caps the structure.

The drawing emphasizes joint sealants and wooden plates for airtightness,

ensuring maximum soundproofing effectiveness.

It depicts all edges and joints meticulously sealed for optimal performance.

Drawing of an Archimedean spiral with specified parameters.

Schematic diagram for a wooden fence.

Overall dimensions show length height and elevation.

Includes detailed components such as vertical posts and panel types.

Solid slatted panels follow a specific arrangement with measurements.

Visual layout provides guidance on placement of materials.

Clear representation of posts and panels.

This technical drawing represents a rectangular section with notches.

The front view shows a height of 30 units and a width of 50 units,

highlighting 10x10 notches on each side.

The top view maintains the same width of 50 units and a depth that includes the notches.

The side view reflects a height of 30 units and a depth of 50 units,

showcasing the notches as protrusions.

This illustration can be utilized in engineering and architectural contexts for precise representation of specifications.

A vibrant pink fabric swirled in a bowl with red liquid being poured from a spoon.

A suspension control arm made of .

125 inch thick sheet metal.

Metal cut flat and bent into shape and welded.

Focus on details of the metallic structure.

Design a wooden ladder with a total height of 230 cm.

Include two pieces of side rails and eight steps.

Consider step spacing and the angle of the side rails.

Technical drawing of a dual-sided e-paper departure board.

E-paper panel is 13 inches integrated into a housing.

Housing dimensions are 42 cm x 40 cm x 10 cm.

Landscape format with two M10 drilling holes on the left side.

Drawing shows front perspective with size annotations.

Design of a chicken cage house featuring mesh wire walls and galvalum frame.

It includes 20 compartments,

each measuring 1m x 1m x 0.

6m.

The structure has 5 floors,

each with a height of 0.

6m,

and overall height of 3m,

width of 1m,

and length of 4m.

Design a wooden ladder with total height 230 cm.

Include 2 pieces of side rails,

8 steps,

step spacing,

and angle of side rails.

Technical drawing of a rectangular section with notches.

Height measures 30 units.

Width measures 50 units.

Features 10x10 notches on either side.

Top view shows width of 50 units.

Side view emphasizes height of 30 units and depth of 50 units.

Suitable for engineering and architectural projects.

Two tubes of lip lightning cream placed on soft pink background.

A swatch of the cream spills out beside the tubes.

The tubes are pastel pink and feature labels in a clean font.

An automatic hand-caught cake up and down laminating machine with a base.

Includes a mounting plate connected to the base.

Features unwinding and rewinding rollers.

A first motor is attached to one end,

with a guide rod and guide roller.

The installation plate has a conveyor mechanism and a hot pressing mechanism.