Another Fibreboard With Green Glue To Gypsum Board Generator

This image depicts a simplified 2D cross-section drawing of a soundproof wall.

The wall includes layers starting with fibreboard attached to gypsum board,

separated by green glue.

The second layer consists of resilient channels attached to a staggered stud frame,

topped with another fibreboard bonded with green glue to a gypsum board.

A finishing drywall layer completes the exterior surface.

Each material is labeled clearly with distinct colors for easy identification.

This is a 2D cross-section drawing of a staggered stud wall designed for sound isolation.

The drawing shows multiple layers starting from the inner portion,

including staggered studs creating an air gap.

Rockwool insulation fills the spaces between these studs.

Next,

there’s a secondary layer comprising 12.

7 mm Fibreboard attached to 15.

9 mm Gypsum Board,

using Green Glue for enhanced damping.

The outer layer features resilient channels affixed to the studs,

topped with another layer of 12.

7 mm fibreboard and 18 mm gypsum board.

The drawing also illustrates joint sealants and wooden plates for airtightness.

Lastly,

all joints and edges are carefully sealed to ensure soundproofing efficacy.

A plastic board with specific dimensions and features.

The board thickness is 5mm,

width is 8cm,

and length is 40cm.

Rails are present on the length sides,

with a thickness of 3mm and a height of 2.

5cm.

A hole is located in the middle of the board.

The hole is circular,

5mm in diameter,

centered at 20cm from the width.

A section is cut off for the hole to create a straight line facing the width side,

with an arc.

The longest distance from the middle of the straight part to the arc measures 4.

5mm.

Technical drawing showcases dual-sided e-paper departure board.

E-paper panel has integrated housing.

Dimensions are 42 cm x 40 cm x 10 cm.

Layout is landscape.

Two M10 drilling holes are on the left side.

Size annotations are included.

Box designed for food packaging featuring one compartment for liquid and two for bread.

Easily portable for consumers.

Technical drawing of a dual-sided e-paper departure board.

E-paper panel is 13 inches integrated into a housing.

Housing dimensions are 42 cm x 40 cm x 10 cm.

Landscape format with two M10 drilling holes on the left side.

Drawing shows front perspective with size annotations.

Design of a chicken cage house featuring mesh wire walls and galvalum frame.

It includes 20 compartments,

each measuring 1m x 1m x 0.

6m.

The structure has 5 floors,

each with a height of 0.

6m,

and overall height of 3m,

width of 1m,

and length of 4m.

This image illustrates a staggered stud wall design standing 8 feet high,

optimized for maximum acoustical isolation.

It features two layers of 2x4 wood framing with interwoven batt insulation.

A resilient furring strip is shown installed every 2 feet horizontally,

which supports a layer of ¾ inch plywood.

A layer of ½ inch gypsum wall board is directly fastened to the plywood on both sides.

Additionally,

the design includes a 1x6 wood finish wall base accentuated with a bullnose top and quarter-round trim at the bottom.

Clear labels indicate the wood framing's top plate and sole plate,

ensuring easy understanding of the construction details.

Simplified two-dimensional cross-section drawing of a soundproof wall.

It shows the arrangement of layers.

Various materials are labeled.

Includes fibreboard,

gypsum board,

resilient channels,

staggered stud frame,

mobile staggered stud,

and finishing drywall.

Color coding highlights each material.

Simplified 2D cross-section drawing of a wall showing different layers such as plasterboard,

vapour barrier,

CLT panel,

wool insulation,

air tightness membrane,

wood fibreboard insulation,

breather membrane,

and recycled wood cladding.

This is a 2D cross-section drawing of a staggered stud wall designed for sound isolation.

The drawing shows multiple layers starting from the inner portion,

including staggered studs creating an air gap.

Rockwool insulation fills the spaces between these studs.

Next,

there’s a secondary layer comprising 12.

7 mm Fibreboard attached to 15.

9 mm Gypsum Board,

using Green Glue for enhanced damping.

The outer layer features resilient channels affixed to the studs,

topped with another layer of 12.

7 mm fibreboard and 18 mm gypsum board.

The drawing also illustrates joint sealants and wooden plates for airtightness.

Lastly,

all joints and edges are carefully sealed to ensure soundproofing efficacy.

Section elevation drawing of a green roof with a grassy hill.

The design shows a relationship with the building structure underneath.

Grass and trees are visible at the top.

Schematic diagram for a wooden fence.

Overall dimensions show length height and elevation.

Includes detailed components such as vertical posts and panel types.

Solid slatted panels follow a specific arrangement with measurements.

Visual layout provides guidance on placement of materials.

Clear representation of posts and panels.

Design a single-storey courtyard school in a rural area with a monopitched roof.

Use wooden double doors and louvre windows.

Include columns supporting the roof and a playground area on the left.

Elevation design for a G+2 floor building facing west.

Modern architecture includes balconies and surrounding greenery.

Box designed for food packaging featuring one compartment for liquid and two for bread.

Easily portable for consumers.

Simplified 2D cross-section drawing of a soundproof wall.

Shows layers including fibreboard,

gypsum board,

green glue,

resilient channels,

staggered stud frame,

mobile staggered stud,

and finishing drywall.

Each material is labeled in distinct colors.

2D cross-section of a decoupled wall shown in pencil drawing style.

Foundational wall at base with staggered studs.

Air gap filled with rockwool insulation for soundproofing.

Two colored layers: vibrant yellow and mild green.

Layers include fibreboard attached to gypsum board with green glue,

resilient channels on staggered stud frame,

another fibreboard with green glue to gypsum board,

and finishing drywall.

Clear labels for materials

PLC control panel housing design for industrial applications.

3D model shows front view,

features door and controls.

Placement for DIN rails and trunking indicated.

Suitable for wall mounting.

This is a simplified technical drawing depicting a 2D cross-section of a 960x960 p10 outdoor LED screen cabinet.

The drawing illustrates the screen's structure and integrated components clearly.

Elevator door is solid black.

Glass panel designed with vibrant colors in mosaic pattern.

Matte finish for a contemporary look.

The panel is centrally located and occupies 50-70% of the door height.

Additional features include modern handles and potential backlighting.

Carton corrugated sleeve box without lid shown.

Box dimensions are 1200 mm x 600 mm x 150 mm.

Thickness of cardboard is 2 mm.

Design a one-story house section with specific construction details and dimensions.

Include a clear section view.

Label all components with their dimensions.

Use hatching to show material differences.

This image features a 2D cross-section of a decoupled wall illustrated in a basic pencil drawing style.

The foundational wall is depicted at the base with a distinct outline.

Above the main wall,

staggered studs are shown,

creating an air gap filled with rockwool insulation for soundproofing properties.

On the other side of the studs,

two colored layers are represented: one is a vibrant yellow,

and the other appears in a mild green hue,

enhancing the visual interest of the structure.

The overall design captures both the technical aspects and aesthetic considerations in wall design.